24/7 Space News
ROCKET SCIENCE
NASA's innovative rocket nozzle paves way for deep space missions
At the RPM Innovation (RPMI) facility in Rapid City, South Dakota, manufacturing for a large-scale aerospike demonstration nozzle with integral channels is underway. The laser powder directed energy deposition (LP-DED) process creates a melt pool using a laser and blows powder into the melt pool to deposit material layer by layer. NASA engineers will use the nozzle as a proof of concept to inform future component designs. RPM Innovation
NASA's innovative rocket nozzle paves way for deep space missions
by Ray Osorio for MSFC News
Huntsville AL (SPX) Oct 20, 2023

NASA recently built and tested an additively-manufactured - or 3D printed - rocket engine nozzle made of aluminum, making it lighter than conventional nozzles and setting the course for deep space flights that can carry more payloads.

Under the agency's Announcement of Collaborative Opportunity, engineers from NASA's Marshall Space Flight Center in Huntsville, Alabama, partnered with Elementum 3D, in Erie, Colorado, to create a weldable type of aluminum that is heat resistant enough for use on rocket engines. Compared to other metals, aluminum is lower density and allows for high-strength, lightweight components.

However, due to its low tolerance to extreme heat and its tendency to crack during welding, aluminum is not typically used for additive manufacturing of rocket engine parts - until now.

Meet NASA's latest development under the Reactive Additive Manufacturing for the Fourth Industrial Revolution, or RAMFIRE, project. Funded under NASA's Space Technology Mission Directorate (STMD), RAMFIRE focuses on advancing lightweight, additively manufactured aluminum rocket nozzles. The nozzles are designed with small internal channels that keep the nozzle cool enough to prevent melting.

With conventional manufacturing methods, a nozzle may require as many as thousand individually joined parts. The RAMFIRE nozzle is built as a single piece, requiring far fewer bonds and significantly reduced manufacturing time.

NASA and Elementum 3D first developed the novel aluminum variant known as A6061-RAM2 to build the nozzle and modify the powder used with laser powder directed energy deposition (LP-DED) technology. Another commercial partner, RPM Innovations (RPMI) in Rapid City, South Dakota, used the newly invented aluminum and specialized powder to build the RAMFIRE nozzles using their LP-DED process.

"Industry partnerships with specialty manufacturing vendors aid in advancing the supply base and help make additive manufacturing more accessible for NASA missions and the broader commercial and aerospace industry," Paul Gradl, RAMFIRE principal investigator at NASA Marshall, said.

NASA's Moon to Mars objectives require the capability to send more cargo to deep space destinations. The novel alloy could play an instrumental role in this by enabling the manufacturing of lightweight rocket components capable of withstanding high structural loads.

"Mass is critical for NASA's future deep space missions," said John Vickers, principal technologist for STMD advanced manufacturing. "Projects like this mature additive manufacturing along with advanced materials, and will help evolve new propulsion systems, in-space manufacturing, and infrastructure needed for NASA's ambitious missions to the Moon, Mars, and beyond."

Earlier this summer at Marshall's East Test Area, two RAMFIRE nozzles completed multiple hot-fire tests using liquid oxygen and liquid hydrogen, as well as liquid oxygen and liquid methane fuel configurations. With pressure chambers in excess of 825 pounds per square inch (psi) - more than anticipated testing pressures - the nozzles successfully accumulated 22 starts and 579 seconds, or nearly 10 minutes, of run time. This event demonstrates the nozzles can operate in the most demanding deep-space environments.

"This test series marks a significant milestone for the nozzle," Gradl said. "After putting the nozzle through the paces of a demanding hot-fire test series, we've demonstrated the nozzle can survive the thermal, structural, and pressure loads for a lunar lander scale engine."

In addition to successfully building and testing the rocket engine nozzles, the RAMFIRE project has used the RAMFIRE aluminum material and additive manufacturing process to construct other advanced large components for demonstration purposes. These include a 36-inch diameter aerospike nozzle with complex integral coolant channels and a vacuum-jacketed tank for cryogenic fluid applications.

NASA and industry partners are working to share the data and process with commercial stakeholders and academia. Various aerospace companies are evaluating the novel alloy and the LP-DED additive manufacturing process and looking for ways it can be used to make components for satellites and other applications.

Related Links
Elementum 3D
NASA Announcement of Collaborative Opportunity - 3D Printing
Rocket Science News at Space-Travel.Com

Subscribe Free To Our Daily Newsletters
Tweet

RELATED CONTENT
The following news reports may link to other Space Media Network websites.
ROCKET SCIENCE
NASA conducts 1st hot fire of new RS-25 Certification Test Series
Bay St. Louis MS (SPX) Oct 19, 2023
NASA conducted the first hot fire of a new RS-25 test series Oct. 17, beginning the final round of certification testing ahead of production of an updated set of the engines for the SLS (Space Launch System) rocket. The engines will help power future Artemis missions to the Moon and beyond. Operators fired the RS-25 engine for more than nine minutes (550 seconds), longer than the 500 seconds engines must fire during an actual mission, on the Fred Haise Test Stand at NASA's Stennis Space Center, ne ... read more

ROCKET SCIENCE
CRS-29 mission flies research to the Space Station

India launches key test for manned orbital mission

India wants a space station by 2035, moon mission by 2040

Planetary Scientist Alan Stern Joins Virgin Galactic for Research Mission

ROCKET SCIENCE
'No prospects': Russians slowly leaving legendary spaceport city

SpaceX Achieves Back-to-Back Starlink Satellite Launches to Expand Global Internet Coverage

NASA's innovative rocket nozzle paves way for deep space missions

New SwRI chamber simulates harsh acoustic environment of rocket launches

ROCKET SCIENCE
Year 2075: Martian rovers saved from cyber attack

Searching for concentrated biosignatures in an ancient, Martian mud lake

Short but Sweet; Sols 3987-3988

Curiosity rover finds new evidence of ancient Mars rivers, a key signal for life

ROCKET SCIENCE
Next-generation rocket for China's manned space missions on track

Final rehearsal for Shenzhou XVII flight completed

Chinese sci-fi fans over the moon at Chengdu Worldcon

China plans new module for Tiangong space station

ROCKET SCIENCE
Follow NASA's Starling Swarm in Real Time

Fugro SpAARC's operations set to grow with new funding from Western Australian Govt

French Space Days India 2023 celebrates Indo-French collaboration

Launch of Ovzon 3 targeted for as soon as December 2023

ROCKET SCIENCE
Researchers developing 'revolutionary' multi-material for light-based 3D printing

Light-powered multi-level memory tech revolutionizes data processing

US Space Force to Leverage Danti's AI-Powered Data Search with AFWERX deal

Scientific Systems wins SpaceWERX contract for space debris solutions

ROCKET SCIENCE
ET phone Dublin? Astrophysicists scan the Galaxy for signs of life

Exoplanet-informed research helps search for radio technosignatures

Webb detects tiny quartz crystals in clouds of hot gas giant

Extreme habitats: Microbial life in Old Faithful Geyser

ROCKET SCIENCE
How NASA is protecting Europa Clipper from space radiation

NASA's Webb Discovers New Feature in Jupiter's Atmosphere

Plot thickens in hunt for ninth planet

Large mound structures on Kuiper belt object Arrokoth may have common origin

Subscribe Free To Our Daily Newsletters




The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.