. 24/7 Space News .
Ultrasonic welding makes parts for NASA missions, commercial industry
by Staff Writers
Pasadena CA (JPL) May 31, 2021

This 3D printed radiator for a CubeSat combines aluminum and a small bit of copper to allow heat to spread more evenly across the face. Fabrisonic was able to combine the metals using additive manufacturing techniques that employ ultrasonic welding Credit: Fabrisonic LLC

A manufacturing innovation that has applications for NASA spacecraft is being transferred to the private sector to support a variety of industries here on Earth.

A burst water main is always expensive and messy, but a pipe that fails in space can be mission-ending. That's why NASA technologists work hard to make hardware as reliable as possible. Sometimes that means scrapping the old way of doing things and experimenting with a brand-new material - or fabrication process.

This challenge spurred Scott Roberts, a technologist at NASA's Jet Propulsion Laboratory in Southern California, to turn to a new kind of welding in the 3D printing industry. The private sector was already using this technique, called ultrasonic additive manufacturing (UAM).

With some additional innovation, Roberts thought it could be used to improve reliability in heat exchangers, a crucial component of any spacecraft. Improvements one company made to its UAM process to help Roberts build better spacecraft are now beginning to pay off in industries from aeronautics to oil drilling.

"The problems I'm working on don't solve one problem for one mission," said Roberts. "They're going to solve a class of problems for both NASA and industry."

What does 3D printing have to do with pipes?

Temperature is a particularly difficult problem in space, where extremes can vary by hundreds of degrees. Heat exchangers help maintain a steady temperature inside a spacecraft by removing excess heat or drawing in more. Traditionally, these devices include a long, snaking pipe attached to a metal plate with brackets and epoxy. Although effective, they consist of many interconnected parts, introducing many potential points of failure.

With ultrasonic additive manufacturing, however, the entire device can be crafted as a single piece. Small Business Innovation Research (SBIR) funding provided by JPL made it possible for Roberts to work with Columbus, Ohio-based Fabrisonic LLC on a new heat exchanger design.

As a subcontractor for Sheridan Solutions LLC, Fabrisonic started with an existing process that builds up multiple thin layers of metal by fusing them together with high-frequency vibrations. To create the heat exchanger, a curved channel is carved into the layered metal and then enclosed under additional layers.

The new design replaces dozens of small parts and joints that could fail during a long-term mission or under extreme conditions on Earth.

How can vibrations fuse metal?

Ultrasonic welding uses sound and friction to create a solid-state bond between layers of metal. It begins with a thin foil pressed onto another metal component such as a base plate. Constant pressure and ultrasonic vibrations cause friction between the facing sides, creating a shearing motion that raises temperatures and removes surface oxides, allowing direct contact of pure metal to pure metal. The result is a solid-state atomic bond that welds layers of metal together. Even layers of different metal can be bonded into a single piece.

Relatively little heat is required because the bonding temperature for metals is significantly below their melting temperature. Fabrisonic can quickly piece together layers as large as six feet square, making it possible to create a part with a complex geometry in a matter of days, rather than the months required by traditional fabrication practices. This shortens the development cycle for a spacecraft or speeds the manufacture of commercial parts.

Why combine different metals?

Protecting electronic components from intense space radiation that can destroy them is challenging when everything on a spacecraft needs to be lightweight. It's one problem Roberts is trying to solve using novel materials. Additional SBIR funding provided by NASA's Langley Research Center in Hampton, Virginia, paid for Fabrisonic to add layers of the radiation-resistant metal tantalum in the middle of aluminum spacecraft parts.

Unlike other forms of welding, UAM won't cause the different metals to liquefy and mix together. Engineers can rely on the properties of each metal to remain constant and perform as expected, said Mark Norfolk, president of Fabrisonic. This quality demonstrated that NASA could realize its goal of combining the aluminum with tantalum.

The ability to meld layers of different metals also has advantages for customers in the oil and gas industry, who now rely on various Fabrisonic parts for drilling, Norfolk noted. One is a well drill pipe - a hollow, thin-walled tubing that combines dissimilar materials and uses embedded sensors.

Why put sensors inside metal?

New fiber optic sensors can detect metal strain or weaknesses and predict possible failures before they occur. But metal manufactured using traditional methods can only support these sensors on the exterior of the part. In an attempt to embed them, the heat used in the manufacturing process would destroy the delicate devices.

Other SBIR funding from Langley helped Fabrisonic, again as a Sheridan subcontractor, test the effectiveness of sensors built into the interior of aluminum parts with ultrasonic welding. After some trial and error to find the best sensors for such an innovative application, engineers were able to obtain accurate, real-time data about the health and performance of the metal. Because the sensors are protected, they can function in harsh environments.

The Oak Ridge National Laboratory in Tennessee, which conducts energy and nuclear research, is successfully using Fabrisonic's embedded sensors in its facilities. In NASA aeronautics testing, these Fabrisonic sensors help detect weaknesses and performance issues in commercial airframes.

What if I want to print small parts myself?

NASA's Marshall Space Flight Center in Huntsville, Alabama, meanwhile, funded Fabrisonic's exploration of the use of advanced metallic materials and UAM for in-space manufacturing, this time as a subcontractor on Phase I and II SBIR contracts with a machine automation company called Ultra Tech Machinery Inc. The agency's engineers worked with Fabrisonic to develop a small UAM printer for use on the space station.

The company had a design ready but didn't know if it would work. NASA specifications made it possible to build, test, and refine the most important component of the printer - the weld head. This part transfers the ultrasonic vibration onto the metal tape used in the printer.

Miniaturizing this technology for fabricating smaller parts offers a more cost-effective approach than using an industrial UAM process. Commercial sales of the company's resulting SonicLayer 1200 printer have generated $1 million in revenue, with one customer producing over 70,000 parts in-house.

Commercial success has allowed the company to develop a diverse customer base and double in size, growing to 12 employees.

"Without SBIR and other government support, Fabrisonic may not have crossed the chasm between startup and commercial success," said Norfolk. "It has enabled important research and developments. It makes critical information available, such as materials characterization data and case studies that help spread technology."

NASA has a long history of transferring technology to the private sector. The agency's Spinoff publication profiles NASA technologies that have transformed into commercial products and services, demonstrating the broader benefits of America's investment in its space program. Spinoff is a publication of the Technology Transfer program in NASA's Space Technology Mission Directorate.

For more information on how NASA brings space technology down to Earth, visit spinoff.nasa.gov
Related Links
Spinoff at NASA
Space Tourism, Space Transport and Space Exploration News

Thanks for being there;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Monthly Supporter
$5+ Billed Monthly

paypal only
SpaceDaily Contributor
$5 Billed Once

credit card or paypal

NASA awards laser air monitoring system contract for Orion
Washington DC (SPX) May 31, 2021
NASA has awarded Dynetics Inc. of Huntsville, Alabama, a contract to produce a Laser Air Monitoring System (LAMS) for the agency's Orion spacecraft beginning with the Artemis III mission. The LAMS contract is valued at $17.8 million for production of the Artemis III unit, as well as a qualification unit, design modifications, and long-lead procurement items in support of the Artemis IV and V missions. It is an indefinite-delivery/indefinite-quantity contract with firm fixed price orders. The ... read more

Comment using your Disqus, Facebook, Google or Twitter login.

Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle

NASA awards new spacecraft avionics development contract

New NASA Student Challenge offers hands-on tech development

Ultrasonic welding makes parts for NASA missions, commercial industry

NASA awards laser air monitoring system contract for Orion

NASA stacks elements for upper portion of Artemis II Core Stage

A passion for hypersonics propels success at AFRL Lab

PLD Space receives ESA contract to study reusing MIURA 5 boosters

Russian rocket launches UK telecom satellites after delay

NASA's Curiosity rover captures shining clouds on Mars

Newly discovered glaciers could aid human survival on Mars

Surviving an in-flight anomaly: what happened on Ingenuity's 6th flight

NASA software unlocks Martian rover productivity

China cargo craft docks with space station module

New advances inspire China's deep space exploration

China postpones launch of robotic cargo spacecraft

Space station core module in orbit to prep for next stage of construction

Kleos engages ISISPACE to build third satellite cluster

Iridium makes strategic investment in DDK Positioning for enhanced GNSS accuracy

European space program seeks first disabled astronaut

SES Prices EUR 625 Million Hybrid Bond Offering

ESA's Space Environment Report 2021

Canadian manipulator on ISS holed by space debris

AFRL Materials Characterization Facility pushes state of the art

Graphene solves concrete's big problem

Thirty year stellar survey cracks mysteries of galaxy's giant planets

Scientists develop new molecular tool to detect alien life

Deep oceans dissolve the rocky shell of water-ice planets

Origins of life researchers develop a new ecological biosignature

Jupiter antenna that came in from the cold

Europa's interior may be hot enough to fuel seafloor volcanoes

Experiments validate the possibility of helium rain inside Jupiter and Saturn

Deep water on Neptune and Uranus may be magnesium-rich

The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.