Simulating space on Earth: NASA receives hardware for testing satellite servicing tech

In August 2021, new testing equipment arrived at NASA's Goddard Space Flight Center in Greenbelt, Maryland, in the form of a gravity offset table. NASA engineers will use the table to test robotic satellite servicing technologies that will one day operate in space.

A gravity offset table is a large piece of granite used for testing space payloads in simulated zero-gravity conditions. Measuring 8 feet by 10 feet and weighing 8.5 tons, the slab is polished precisely then leveled. A sled on top holds the test hardware. Three air bearings under the sled output a thin layer of air from a pressurized source allowing items to "float", which simulates how a payload moves in space.

"It's basically like an air hockey table in reverse," said Joe Easley, robot operator group lead at NASA's Exploration and In-Space Services Division at NASA Goddard. "For air hockey, a table perforated with jets of air floats a puck. In our system, it's more like the puck, with the mass of a satellite, floats itself."

To reach true zero-gravity, the table would need to simulate six degrees of freedom or directions in which objects can move. The gravity offset table has three degrees of freedom. It comes very close to zero-gravity - so close that you could push the payload with your finger, and it would glide away from you, just as it would in space.

NASA Goddard has been using this gravity offset technique for developing satellite servicing technologies since receiving its first gravity offset table in early 2017. It was and continues to be used for testing elements of the On-orbit Servicing, Assembly, and Manufacturing 1 (OSAM-1) mission, which will robotically refuel a satellite in space. This technique helps ensure that our complex simulations are accurate and realistic.

Simulating a space-like environment is critical to OSAM-1 testing. The technology demonstration mission will utilize a servicing spacecraft with two robotic arms that must match speed with and grapple a client satellite to refuel it. This is no easy feat since the client satellite was not designed to be grappled, and this operation must be fully autonomous.

Reach too far and the servicer could push the satellite away; don't reach far enough, and the servicer could miss the satellite. A gravity offset table allows NASA to test how a robot arm would interact with a satellite in space, which is mimicked by the payload on top of the sled.

"It represents physics pretty well," Easley said. "If I were to push on a satellite in space with my hand, it would probably move a lot like how the gravity offset table would move it here on Earth, with a few more directional constraints on Earth, of course."

Goddard's two gravity offset tables have essentially the same design and capabilities. The new gravity offset table will allow engineers to test various satellite servicing applications at once. Engineers plan to use the new gravity offset table to test hardware called grapple fixtures that could make satellites easier to grapple and, therefore, service when incorporated in the design.

"Simulating space-like conditions on Earth with gravity offset tables expands NASA's ability to test groundbreaking technologies and maximize the chance of success in first-of-their-kind missions," Easley said.

Related Links
On-orbit Servicing, Assembly, and Manufacturing 1 (OSAM-1) Mission
Space Technology News - Applications and Research

Tweet

Thanks for being there;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.

SpaceDaily Monthly Supporter
$5+ Billed Monthly

paypal only

SpaceDaily Contributor
$5 Billed Once

credit card or paypal

Arkisys unveils first spacecraft element for The Port in Pasadena
Los Angeles CA (SPX) Sep 29, 2021
Arkisys has unveiled its first generation orbital outpost spacecraft element, the Port Module Wedge, planned for its first use on its initial Space Outpost in low earth orbit, as well as subsequent future missions and destinations. Standing at approximately 1 meter tall and just over 1 meter wide, it is the core architectural component that defines the unique commercial-focused development of Arkisys Ports in Space, scaleable aggregatable platforms for arrival and departures of new technology inno ... read more