24/7 Space News
ROCKET SCIENCE
Launch of world's first 3D-printed rocket canceled at last second
Reuters Events SMR and Advanced Reactor 2025
Launch of world's first 3D-printed rocket canceled at last second
By Lucie Aubourg and Chris Lefkow
Washington (AFP) March 11, 2023

The launch of the world's first 3D-printed rocket was ultimately scrubbed after several tries on Saturday, marking a new setback for the private owner of an innovative spacecraft billed as being less costly to produce and fly.

Engines had begun igniting on the unmanned Terran 1 rocket, built by California aerospace startup Relativity Space, when an "automation" issue caused the company to abort takeoff for the second time in less than a week.

A little later, the company tried again to launch the spacecraft from Florida's Cape Canaveral but had to abort due to pressure issues in the rocket's second stage, the company later tweeted.

"The team went HARD today and we intend to do so during our next attempt. More to come on the new launch date," Relativity said.

At one point during the three-hour launch window, which began at 1:00 pm (1800 GMT), the countdown was put on hold when a private boat violated a danger zone.

An earlier scheduled launch last Wednesday was also postponed over last-minute propellant temperature issues.

Once it does take off, Terran 1 is set to reach low Earth orbit after eight minutes on a voyage intended to gather data and demonstrate that a 3D-printed rocket can withstand the rigors of liftoff and space flight.

If the rocket manages to attain low Earth orbit, it will be the first privately funded vehicle using methane fuel to do so on its first try, according to Relativity.

Terran 1 is not expected to carry a payload for its first flight, but the rocket will eventually be capable of putting up to 2,755 pounds (1,250 kilograms) into low Earth orbit.

The rocket is 110 feet (33.5 meters) tall with a diameter of 7.5 feet (2.2 meters).

Eighty-five percent of its mass is 3D printed with metal alloys, including the engines.

It is the largest ever 3D printed object, according to the Long Beach-based company, and is made, it says, with the world's largest 3D metal printers.

- Built in 60 days -

Relativity's goal is to produce a rocket that is 95 percent 3D printed.

Terran 1 is powered by Aeon engines using liquid oxygen and liquid natural gas -- the "propellants of the future," capable of eventually fueling a voyage to Mars, Relativity says.

Vulcan rockets being developed by United Launch Alliance and SpaceX's Starship use the same fuel.

Terran 1 has nine 3D-printed Aeon 1 engines on its first stage and one 3D-printed Aeon Vacuum engine on its second stage.

Relativity is also building a larger rocket, Terran R, capable of putting a payload of 44,000 pounds (20,000 kgs) into low Earth orbit.

The first launch of a Terran R, which is designed to be fully reusable, is scheduled for next year from Cape Canaveral.

A satellite operator can wait for years for a spot on an Arianespace or SpaceX rocket, and Relativity Space hopes to accelerate the timeline with its 3D-printed rockets.

"Long-term, a major benefit of 3D printing is the ability to more rapidly democratize space due to the incredible cost effectiveness, radical flexibility and customization," the company said.

Relativity said its 3D-printed rockets use 100 times fewer parts than traditional rockets, and can be built from raw materials in just 60 days.

Relativity has already signed commercial launch contracts worth $1.65 billion, mostly for the Terran R, according to CEO Tim Ellis, who co-founded the company in 2015.

"Medium-heavy lift is clearly where the biggest market opportunity is for the remaining decade, with a massive launch shortage in this payload class," Ellis tweeted.

Related Links
Rocket Science News at Space-Travel.Com

Subscribe Free To Our Daily Newsletters
Tweet

RELATED CONTENT
The following news reports may link to other Space Media Network websites.
ROCKET SCIENCE
Private firm to launch maiden rocket flight in Spain
Moguer, Spain (AFP) March 11, 2023
A micro rocket built by a Spanish company will lift off within several weeks, Prime Minister Pedro Sanchez said on Saturday, a first for Spain as a space race hots up in Europe. "This rocket, when it is launched, we Spaniards we will all watch it on television and I know that when, within several weeks MIURA1 will begin its journey, the devotion and hard work of many people ... will have been worthwhile," Sanchez said at the El Arenosillo launch site at Huelva, in Andalusia. PLD Space's MIURA1 s ... read more

ROCKET SCIENCE
SpaceX cargo resupply mission CRS-27 scheduled for launch Tuesday

NASA SpaceX Crew-5 splashes down after 5-month mission

China to revamp science, tech in face of foreign 'suppression'

DLR goes all in with new technology at the Startup Factory

ROCKET SCIENCE
Private firm to launch maiden rocket flight in Spain

Launch of world's first 3D-printed rocket canceled at last second

Arianespace inks deal to launch at least two Vega-C rockets

Launch of Relativity Space's 3D-printed rocket aborted

ROCKET SCIENCE
ExoMars rover testing moves ahead and deep down

ExoMars: Back on track for the Red Planet

Taking turns with Tapo Caparo: Sols 3766-37368

Don't Dream and Drive: Sols 3764-3765

ROCKET SCIENCE
China's Shenzhou-15 astronauts to return in June

China's space technology institute sees launches of 400 spacecraft

Shenzhou XV crew takes second spacewalk

China conducts ignition test in Mengtian space lab module

ROCKET SCIENCE
Australian astronaut candidate to receive basic training with ESA

Eutelsat and Intelsat sign multi-orbit contract enhancing connectivity with OneWeb

Spacetime will orchestrate LEO network for Rivada constellation

HawkEye 360's latest satellite cluster begins operation

ROCKET SCIENCE
Antenova's tiny GNSS module with integrated antenna, high precision and low power

Student-built satellite uses 'beach ball' for an antenna

Airbus partners with Kythera for OneSat mission sizing software

Keysight introduces 2 GHz real-time spectrum analysis solution for satellite operators

ROCKET SCIENCE
Distant star TOI-700 has two potentially habitable planets

DLR Gottingen helps in the search for signs of life in space

CHEOPS mission extended

Astronomers find missing link for water in the Solar System

ROCKET SCIENCE
Inspiring mocktail menu served up by Space Juice winners

Study finds ocean currents may affect rotation of Europa's icy crust

First the Moon, now Jupiter

Newly discovered form of salty ice could exist on surface of extraterrestrial moons

Subscribe Free To Our Daily Newsletters




The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.