. | . |
Which products are best suited for emerging carbon capture technologies by Staff Writers Ann Arbor MI (SPX) Aug 25, 2021
Pulling heat-trapping carbon dioxide out of the air and turning it into useful products, a concept called carbon capture and utilization, has the potential to offer both environmental and economic benefits. By some optimistic estimates, CCU could generate annual revenues of more than $800 billion by 2030 while reducing climate-altering carbon dioxide emissions by up to 15%. Captured CO2 could potentially be used to make concrete and other building materials, fuels, plastics, and various chemicals and minerals used in industry, agriculture, medicine and elsewhere. But which of these products would be most helpful to the climate? Until now, there has been no comprehensive study comparing the climate benefits of a full range of potential CCU-derived products. A new University of Michigan study fills that critical gap by analyzing 20 potential uses of captured carbon dioxide in three categories-concrete, chemicals and minerals-and ranking them by climate benefit. Previous studies showed that using CCU to make products in those three categories has the potential to consume up to 6.2 gigatons of carbon dioxide annually by 2050. The U-M researchers found that only four of the 20 "CCU pathways" they analyzed-two that use CO2 to make concrete and two that use it to manufacture chemicals-have a greater than 50% likelihood of generating a net climate benefit. A net climate benefit means the emissions avoided by using CCU technology outweigh the emissions generated while capturing the CO2 and making the final product. The study, conducted by researchers from the Center for Sustainable Systems at U-M's School for Environment and Sustainability and at the U-M Department of Mechanical Engineering, was published online Aug. 22 in the journal Environmental Science and Technology. "Decisions to globally scale CCU operations will require guidance on identifying products that maximize the climate benefits of using captured CO2," said lead author Dwarak Ravikumar, a former postdoctoral researcher at U-M's Center for Sustainable Systems who is now at the National Renewable Energy Laboratory. "Our rankings will help prioritize R and D strategies toward products with the greatest climate benefit while avoiding pathways that incur a significant climate burden and that offer little hope for improvement," Ravikumar said. The new study also showed that, at the present time, electricity produced from renewable sources such as wind often leads to a greater climate benefit if it is supplied to the grid to offset fossil fuel emissions, instead of being used to make CCU products. That will change over time as fossil fuels are gradually phased out, according to the study authors. "Currently, there is a greater opportunity to reduce carbon emissions by using renewable energy sources to displace fossil fuel-based electricity generation than investing in many of the CCU technologies," said study co-author Greg Keoleian, director of the Center for Sustainable Systems. "This study is important for prioritizing and guiding the future development and deployment of CCU technologies, particularly as energy supplies decarbonize," Keoleian said. In carbon capture and utilization, carbon dioxide gas can either be pulled from flue gases at facilities such as power plants and cement factories, or it can be removed from the ambient air through a process called direct air capture. In the U-M study, the carbon dioxide is assumed to have been captured from a natural gas power plant. In their study, the U-M researchers determined the lifecycle carbon dioxide footprints of the materials and energy needed to make the CCU products, then compared those values to the materials and energy needed to make conventional versions of those products. They developed a climate return on investment metric to rank and prioritize the CCU products. The four CCU pathways with a higher than 50% likelihood of generating a net climate benefit included two methods that use carbon dioxide to mix concrete, one method to produce formic acid through the hydrogenation of carbon dioxide, and one method to make carbon monoxide from methane. Formic acid is used as a preservative and an antibacterial agent in livestock feed and is used to tan leather and to dye textiles. Carbon monoxide is used in various industrial processes including synthetic chemical manufacturing and metallurgy. "While we highlight four technologies, many of the others addressed in our study will provide a climate benefit under the right boundary conditions and will generate the products we need. It's just that the options to achieve these benefits are more restricted. In this study, that is expressed as the likelihood of a climate benefit," said study co-author Volker Sick, a U-M professor of mechanical engineering and director of the Global CO2 Initiative. CCU is distinct from carbon capture and sequestration (CCS), which involves sucking up carbon dioxide and burying it underground. The other author of the Environmental Science and Technology paper is Shelie Miller of the Center for Sustainable Systems, a professor at the School for Environment and Sustainability and director of U-M's Program in the Environment. The research was supported by the U-M-based Global CO2 Initiative, the Center for Sustainable Systems, the School for Environment and Sustainability, and the Blue Sky Program at the U-M College of Engineering. The mission of the U-M-based Global CO2 Initiative is to get carbon capture and utilization recognized and implemented as a mainstream climate solution.
Research Report: "Assessing the Relative Climate Impact of Carbon Utilization for Concrete, Chemical, and Mineral Production."
FSU researchers refine estimate of amount of carbon in Earth's outer core Tallahassee FL (SPX) Aug 20, 2021 New research from Florida State University and Rice University is providing a better estimate of the amount of carbon in the Earth's outer core, and the work suggests the core could be the planet's largest reservoir of that element. The research, published in the journal Communications Earth and Environment, estimates that 0.3 to 2.0 percent of the Earth's outer core is carbon. Though the percentage of carbon there is low, it's still an enormous amount because the outer core is so large. The ... read more
|
|
The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us. |