Researchers develop smaller, lighter radiation shielding
by Staff Writers
Raleigh NC (SPX) Feb 13, 2020
Researchers at North Carolina State University have developed a new technique for shielding electronics in military and space exploration technology from ionizing radiation. The new approach is more cost effective than existing techniques, and the secret ingredient is...rust.
"Our approach can be used to maintain the same level of radiation shielding and reduce the weight by 30% or more, or you could maintain the same weight and improve shielding by 30% or more - compared to the most widely used shielding techniques," says Rob Hayes, co-author of a paper on the work and an associate professor of nuclear engineering at NC State. "Either way, our approach reduces the volume of space taken up by shielding."
Ionizing radiation can cause significant problems for electronic devices. To protect against this, devices that may be exposed to radiation - such as devices used in spacecraft - incorporate radiation shielding.
Weight is a significant factor in designing aerospace technologies, and the shielding most commonly found in aerospace devices consists of putting an aluminum box around any sensitive technologies. This has been viewed as providing the best tradeoff between a shield's weight and the protection it provides.
The new technique relies on mixing oxidized metal powder - rust - into a polymer, and then incorporating it into a common conformal coating on the relevant electronics.
"Metal oxide powder offers less shielding than metal powder would, but oxides are less toxic and don't pose electromagnetic challenges that could interfere with a device's operation," Hayes says.
"Radiation transport calculations show that inclusion of the metal oxide powder provides shielding comparable to a conventional shield," says Mike DeVanzo, a former graduate student at NC State and first author on the work. "At low energies, the metal oxide powder reduces both gamma radiation to the electronics by a factor of 300 and the neutron radiation damage by 225%."
"At the same time, the coating is less bulky than a shielding box," Hayes says. "And in computational simulations, the worst performance of the oxide coating still absorbed 30% more radiation than a conventional shield of the same weight.
"On top of that, the oxide particulate is much less expensive than the same amount of the pure metal," Hayes says.
"This could potentially reduce the need for conventional shielding materials on space-based electronics," adds DeVanzo, who works at Lockheed Martin Space.
The researchers are continuing to test and fine-tune their shielding technique for use in various applications.
"We're now looking for industry partners to help us develop the technology for commercial use," Hayes says.
UNH researchers find clues to how hazardous space radiation begins
Durham NH (SPX) Feb 04, 2020
Scientists at the University of New Hampshire have unlocked one of the mysteries of how particles from flares on the sun accumulate at early stages in the energization of hazardous radiation that is harmful to astronauts, satellites and electronic equipment in space. Using data obtained by NASA's Parker Solar Probe (PSP), researchers observed one of the largest events so far during the mission. These observations show how plasma that is released after a solar flare - a sudden flash of increased br ... read more
|The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.