. | . |
Purdue-designed heat transfer experiment arrives at International Space Station by Jared Pike West Lafayette IN (SPX) Aug 16, 2021
People who design spacecraft must prioritize two factors: reducing weight and managing extreme temperatures. A new experiment designed by Purdue University engineers addresses both problems. The Flow Boiling and Condensation Experiment (FBCE), which arrived at the International Space Station on Thursday (Aug. 12), will soon advance the science of heat transfer in microgravity. "Vehicles like the space shuttle used single-phase cooling, which circulates liquid through tubes to remove heat from the avionics," said Issam Mudawar, the Betty Ruth and Milton B. Hollander Family Professor of Mechanical Engineering, and the principal investigator of the FBCE. "But these systems are complex and add a lot of weight to the spacecraft. What we've been exploring is using two-phase flow, which is more efficient and reduces the size of the cooling hardware." Two-phase flow refers to two phases of matter - liquid and vapor - that happen during boiling and condensation. In a process known as "flow boiling," a specialized liquid flows by a heat source, which causes the liquid to boil and create bubbles. Those bubbles of vapor flow past the heat source, reject the heat, and then condense back into liquid, which recirculates constantly in a closed system. It's a highly efficient and well-studied process, but one aspect remains unknown: is flow boiling in space as efficient as flow boiling on Earth? To find the answer, Mudawar formed a research partnership with NASA's Glenn Research Center. His team designed and built an experiment to test flow boiling and condensation in microgravity, and in 2012 the team sent it on the "vomit comet," an airplane that simulates periods of 15-17-seconds of microgravity by flying up-and-down parabolas. "We discovered that at certain flow rates, microgravity actually did reduce the amount of heat flux by up to 50%," Mudawar said. In collaboration with colleagues at Glenn Research Center, Mudawar's team continued to tweak multiple factors in the process, and in the next few years, sent the experiment up several times on parabolic flights with Zero Gravity Corporation (ZERO-G). Purdue students were aboard to operate the equipment. "Our goal has always been to achieve design specifications for the experiment to actually be performed in space," Mudawar said. The researchers got their wish earlier this year. Mudawar and his colleagues at Glenn Research Center had been working on a smaller version of the experiment to fit in a specific rack on the International Space Station. In March, they confirmed that this new experiment module, FBCE, had passed all of NASA's safety and readiness reviews and was ready to be launched. "This is no small task," Mudawar said. "Every single structural member needs to be optimized for weight and size. Every single screw has to be evaluated and certified. It's actually good preparation for trying to make future spacecraft lighter, which is what we're trying to accomplish!" On Tuesday, an Antares rocket launched from the Mid-Atlantic Regional Spaceport on Wallops Island, Virginia. Atop the rocket was a Northrop-Grumman Cygnus spacecraft carrying 3,000 pounds of supplies for the astronauts aboard ISS, as well as the FBCE and three other science experiments. Cygnus docked with ISS on Thursday. Astronauts will soon run the science equipment through operational readiness reviews and, later this year, will begin to conduct the experiment. "This is truly a milestone for Purdue's space research," Mudawar said. "I've had 14 Ph.D. students and one master's student work with me on this project over the past decade. And teaming up with Glenn Research Center has been a perfect partnership. This will be the largest phase change experiment ever conducted in space. Hopefully, what we learn from this experiment can be used to make future spacecraft more efficient, and enable us to go to the moon, Mars and beyond."
Experiment bound for Space Station turns down the heat Cleveland OH (SPX) Aug 05, 2021 A lot of power means a lot of heat. NASA's future missions to explore the Moon and Mars will require enormous amounts of electrical power and hardware to support astronauts and drive new technologies. This increase in power, however, also increases the amount of heat generated-and then that heat needs to be removed so all the spacecraft systems can function. To remove heat efficiently and reduce the mass of the cooling system, NASA is investigating new methods of transferring heat in space. One of ... read more
|
|
The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us. |