24/7 Space News
Innovative NASA alloy used for 3D printed rocket
illustration only
Innovative NASA alloy used for 3D printed rocket
by Nancy Smith Kilkenny for Glenn News
Cleveland OH (SPX) May 03, 2023

In March, the Relativity Space Terran 1 rocket lit up the night sky as it launched from Cape Canaveral Space Force Station in Florida. This was the first launch of a test rocket made entirely from 3D-printed parts, measuring 100 feet tall and 7.5 feet wide. A form of additive manufacturing, 3D printing is a key technology for enhancing capabilities and reducing cost. Terran 1 included nine additively manufactured engines made of an innovative copper alloy, which experienced temperatures approaching 6,000 degrees Fahrenheit.

Created at NASA's Glenn Research Center in Cleveland under the agency's Game Changing Development program, this family of copper-based alloys known as Glenn Research Copper, or GRCop, are designed for use in combustion chambers of high performance rocket engines. A combination of copper, chromium, and niobium, GRCop is optimized for high strength, high thermal conductivity, high creep resistance - which allows more stress and strain in high temperature applications - and good low cycle fatigue - which prevents material failures -above 900 degrees Farenheit. They tolerate temperatures up to 40% higher than traditional copper alloys, which leads to higher performance components and reusability.

In the late 1980s, NASA wanted to develop an engine for manuvering spacecraft in low-Earth orbit that could withstand multiple firings. Rocket engines encounter complex challenges in design and environments in which they operate, including multiple startups and shutdowns that create a cycle of wear and tear on critical components.

Dr. David Ellis developed the GRCop family of alloys as a NASA-supported graduate student during the space shuttle era. He continued to mature the alloys and their applications throughout his career.

"At the time, Space Shuttle Main Engine combustion chamber liners were typically replaced after one to five missions," explained Ellis. "Our research was able to show that GRCop-84 would easily meet the goal of 100 missions between maintenance service and 500 missions of engine life."

Throughout years of alloy development, Ellis and his team worked with multiple projects and programs, like NASA's Rapid Analysis and Manufacturing Propulsion Technology (RAMPT), to advance different versions of GRCop alloys. The most recent iteration, named GRCop-42, uses a variety of additive manufacturing methods to create single-piece and multi-material combustion chambers and thrust chamber assemblies for rocket engines. These processes improved the performance, while significantly reducing weight and costs of thrust chamber components.

NASA found that the GRCop alloys pair very well with the latest additive manufacturing methods. Modern manufacturing methods such as laser powder bed fusion and directed energy deposition are two approaches that can be used to build GRCop parts for many aerospace applications, such as the Terran 1 rocket engines.

In laser powder bed fusion, a 3D computer model is sliced into thin layers digitally. Then, a powder bed machine, which acts like a printer, begins a process of spreading and fusing thin layers of powder atop one another, thousands of times over to form a complete part. This process of bonding layers together results in materials strength that is comparable to forged metal. The advantage of this method is that finely detailed parts can be created, such as nozzles and cooling channels used for combustion chambers and nozzles.

The directed energy deposition (DED) process uses a laser to create a melt pool. Powder is then blown into the melt pool and cools creating solid material. The 3D motion of a robot directs the building process to create the entire part with the laser and blown powder. The DED process produces larger shapes and components compared to laser powder bed fusion, but with fewer fine details.

"Development projects, like RAMPT, allow advancement of new alloys and processes for use by commercial space, industry, and academia," said Paul Gradl, principal engineer at NASA's Marshall Space Flight Center in Huntsville, Alabama. "NASA takes on the development risk and matures the process from early material and process concepts through certification. This infusion of GRCop-42 alloys into commercial space is another great example of how NASA-led innovations advance industry capabilities and contribute to America's growing space economy."

Under a reimbursable Space Act Agreement, NASA provided technical expertise to Relativity Space that moved GRCop-42 from development into a flight-ready product used to launch the Terran 1 rocket. Relativity Space has shown these higher performing rocket engine components, produced by additive manufacturing with GRCop alloys, could be used in future missions to the Moon, Mars, and beyond.

Game Changing Development is part of NASA's Space Technology Mission Directorate, which develops new cross-cutting technologies and capabilities for NASA's current and future missions.

Related Links
Game Changing Development at NASA
Space Technology News - Applications and Research

Subscribe Free To Our Daily Newsletters

The following news reports may link to other Space Media Network websites.
Outstanding performance of organic solar cell using tin oxide
Groningen, Netherlands (SPX) Apr 26, 2023
Organic solar cells have a photoactive layer that is made from polymers and small molecules. The cells are very thin, can be flexible, and are easy to make. However, the efficiency of these cells is still much below that of conventional silicon-based ones. Applied physicists from the University of Groningen have now fabricated an organic solar cell with an efficiency of over 17 percent, which is in the top range for this type of material. It has the advantage of using an unusual device structure t ... read more

US senators launch renewed push to thwart China

Russia to stay on International Space Station through 2028

Partners extend operation of International Space Station

Voyager will do more science with new power strategy

Falcon Heavy launches massive GEO satellite for Viasat

SpaceX launches first expendable Falcon Heavy rocket

A second pair of SES' O3b mPower satellites launched on a SpaceX rocket

Heavy thunderstorms force SpaceX to delay launch of Falcon Heavy rocket

New findings indicate gene-edited rice might survive in Martian soil

Ensuring robotic arm safety during abrasions

Sols 3812-3813: Tiny Sticks Poking Out at Us

Curiosity: Move slowly and don't break things: Sols 3810-3811

China to promote space science progress on five themes

China to develop satellite constellation for deep space exploration

China's space missions break new ground

Space exploration for betterment of humankind

Latest two O3b mPOWER satellites successfully launched for SES

CGI to extend machine learning to LEO satellite network optimisation

Viper and T-Rex on double rocket launch

Viasat confirms ViaSat-3 Americas set to launch

Innovative NASA alloy used for 3D printed rocket

Deep-learning system explores materials' interiors from the outside

Heed the reed: thatcher scientist on mission to revive craft

Researchers 3D print a miniature vacuum pump

Can ET detect us

A stormy, active sun may have kickstarted life on Earth

Scientists discover rare element in exoplanet's atmosphere

UGA researchers discover new planet outside solar system

Juice's first taste of science from space

Icy Moonquakes: Surface Shaking Could Trigger Landslides

Europe's Jupiter probe launched

Europe's JUICE mission blasts off towards Jupiter's icy moons

Subscribe Free To Our Daily Newsletters

The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.