3D-printed lunar floor

A skeletal floor for the ESA-supported lunar habitat design which was created by leading architects Skidmore, Owings and Merrill and currently on show at this year's Venice Biennale.

This prototype floor design section was 3D printed in stainless steel by Dutch company MX3D, famous for creating a 3D-printed bridge in Amsterdam.

Designed to meet efficiency, use, and construction constraints, the structure's smooth web pattern design emerged from delineating stress map analysis and optimising a continuous topology to reduce mass and make maximum use of 3D printing manufacturing methods.

It was printed using robotic 'wire arc additive manufacturing' out of 308LSi stainless steel and took about 246 hours to make, adding up to a total mass of approximately 395 kg and a maximum diameter of approximately 4.5 m once assembled.

The overall floor design is made out of six separate segments that were printed vertically before being welded together. The 3D printed structure is supported by three columns and hosts a series of floor panels.

"The innovative floor design is supported from columns in the habitat walls, cantilevering towards the perimeter and centre," comments Daniel Inocente, SOM Senior Designer for the study.

"We looked at the manufacturing constraints and used our analysis to interpolate a web pattern that followed the angular limits of the 3D printing machines. The cross section and thickness was also analysed and differentiated to reduce the overall mass - with reduced thickness at the exterior/interior boundaries."

"This was a great opportunity to show the potential of our technology for the fabrication of lightweight metal structures together with ESA and SOM," explains Gijs van der Velden, CEO of MX3D. "It was a perfect project for MX3D to leverage its experience in printing topology optimised metal structures. Achieving an optimal use of material is a company goal at MX3D because - just as when designing space applications - every reduced kilo in a MX3D design is a direct win for a project's feasibility."

Advenit Makaya, Advanced Manufacturing Engineer at ESA says: "This is a remarkable achievement from MX3D, which further highlights the potential of this additive manufacturing technique for an increasing range of space applications. The design flexibility and the possibility to combine the printed structure with embedded monitoring systems - as demonstrated in the 3D-printed bridge in Amsterdam - are worth investigating for applications in space structures.

"This technique could also be considered for in-situ construction of infrastructure during sustainable exploration missions, for instance by using metallic feedstock derived from the locally available regolith."

Thomas Rohr, Head of the Materials and Processes team at ESA adds: "The capabilities of MX3D demonstrate inspiring concurrence of engineering and art, and are another great example to what extent additive manufacturing has already entered our society. For space applications, such technologies not only provide improvements in performance but can lead to unprecedented and enabling design solutions."

This prototype was not able to be exhibited at SOM's Biennale show, entitled 'Life Beyond Earth', but shows the scale of the four-storey semi-inflated habitat the company has devised for their design study of future lunar settlement.

Related Links
Skidmore, Owings and Merrill
Space Technology News - Applications and Research

Tweet

Thanks for being there;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.

SpaceDaily Monthly Supporter
$5+ Billed Monthly

paypal only

SpaceDaily Contributor
$5 Billed Once

credit card or paypal

Marines 3D-print headcap for mine clearing line charge
Washington DC (UPI) Aug 30, 2021
Members of the U.S. Marine Corps 3D-printed a headcap for the rocket motor used to detonate a M58 Mine Clearing Line Charge, or MICLIC, the branch announced on Monday. The headcap is part of a Mk22 5-inch rocket motor that propels and detonates the MICLIC, which clears a one-vehicle wide lane through minefields and other obstacles, according to the Marine Corps. The headcap is the latest item the Marine Corps has 3D-printed as it explores the usefulness of the technology for Marines and ... read more