by Staff Writers
Raleigh NC (SPX) Aug 21, 2017
North Carolina State University engineers have utilized vacuum to create a more efficient, hands-free method for filling complex microchannels with liquid metal. Their work addresses two of the most common difficulties in creating liquid metal-filled microchannels and may enable broader use of liquid metals in electronic and microfluidic applications.
Liquid metals are promising as soft, stretchable electrical components such as antennas, circuits, electrodes and wires. These applications often require the ability to pattern the liquid metal into different and sometimes complicated shapes at scales smaller than 100 microns, or the width of a human hair.
This is accomplished by pushing the liquid metal into microchannels - small, hollow, tube-like structures within a flexible elastomer material. The most common method for creating these patterns is injection, which pushes the metal into the channels via a small hole, or inlet.
However, injection has two specific drawbacks. First, the pressure required to push the metal into the microchannel can cause the channels to rupture and leak. Second, to completely fill the channel, the air trapped within it must have a means of escape.
That means each channel has to have two openings - an inlet and an outlet - which take up additional space and can cause microchannel deformation at the outlet site.
"Utilizing vacuum allows us to solve both of these problems," says Michael Dickey, professor of chemical and biomolecular engineering at NC State and corresponding author of a paper describing the work.
"We place a drop of liquid metal on top of the inlet and expose the elastomer to vacuum. The air escapes the microchannel through the drop of liquid metal covering the inlet, or through the walls of the channels themselves. When the elastomer is exposed to atmosphere again, the metal gets pushed into the microchannels."
To test the efficacy of the approach, Dickey and his team created a "maze" of microchannels within poly(dimethylsiloxane), or PDMS, a silicon elastomer commonly used in microfluidic applications.
The microchannels were 100 microns wide and 50 microns tall, with small cross-sections, numerous branches, and many dead ends. The small scale and limited space meant there was only one inlet and no room to punch outlets for the air to escape. Then they placed a drop of the liquid metal EGain, a mixture of gallium and indium, on top of the inlet and exposed it to vacuum.
"Using vacuum we found that that the channels completely filled with fewer defects compared to the injection method, and without the need for any outlets," says Dickey.
Research Report: "Vacuum Filling of Complex Microchannels with Liquid Metal"
Washington (UPI) Aug 15, 2017
Using a combination of electricity and silver, researchers in Sweden have developed a new method for preventing bacterial growth on plastics. The breakthrough could prove a godsend for hospitals, where plastics are ubiquitous and bacterial infections are a constant risk. Scientists have known about the antimicrobial qualities of electricity and silver nanoparticles, both individu ... read more
North Carolina State University
Space Technology News - Applications and Research
|The content herein, unless otherwise known to be public domain, are Copyright 1995-2017 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement|