![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
. | ![]() |
. |
![]()
Mojave - Sep 22, 2003 Four years ago, Scaled conducted a study of rocket engine technologies that were appropriate for its future manned sub-orbital spaceship design. The results of this study were that a hybrid configuration using nitrous oxide (liquid N2O) and HTPB (rubber) propellants would likely provide the safest solution with operating characteristics that would complement the intended mission. In Jan 2000, Scaled defined a new integrated concept for the hybrid motor that allowed the entire propulsion system to be mounted to the spaceship by simple skirt flanges on the oxidizer tank. This concept, which cantilevers the case and nozzle directly to the tank, required an advanced all-composite design approach. By early 2001, Scaled had committed to developing the two main motor composite components in-house: The first is the nitrous oxide tank, a composite liner laid up onto titanium flanges, with a graphite over-wrap provided by Thiokol. The second is a unitized fuel case/nozzle component fabricated using a high-temperature composite insulator with a graphite/epoxy structure laid up onto an ablative nozzle supplied by AAE Aerospace. In mid 2001, Scaled awarded contracts to two competing small businesses for the "rocket science". Each company was independently responsible for the development of the motor's ignition system, main control valve, injector, tank bulkheads, electronic controls, fill/dump/vent systems and fuel casting. The vendors, Environmental Aeroscience Corporation (eAc) of Miami and SpaceDev (SD) of San Diego, were also tasked with conducting the ground firing tests of their motor systems in Scaled's test facility during the development phase. In June 2002, Scaled selected eAc to supply the components at the tanks' front end: the nitrous fill, vent and dump system components and associated plumbing. Both vendors continued the development of all the other propulsion components. The ground firing development program started in November 2002 with a 15 second run by the SpaceDev team and ended early this month with a 90-second run by eAc. Both vendors demonstrated full design-duration firings during the nine-month development phase. All tests have exclusively used 100% flight hardware, with no boilerplate components and both vendors' motor systems met the contracted performance. The tests validated the inherent safety of hybrid type motors, with no instances of structural failure, hot-gas breach, explosion or other anomaly that would have put SpaceShipOne in jeopardy. Because both teams were so closely matched, and since both have developed satisfactory motors the process to select one of these vendors to enter the motor qualification and flight test phase was difficult. However, today, Scaled is pleased to announce that it has awarded the contract for propulsion support for the SpaceShipOne flight test phase to SpaceDev, of San Diego. Scaled now looks forward to entering into the historic phase of private manned space flight. Scaled does not pre-announce the specific flight test plans for the space program, however completed accomplishments are updated as they happen. Related Links Scaled Composites SpaceDev X Prize SpaceDaily Search SpaceDaily Subscribe To SpaceDaily Express
![]() ![]() SpaceDev was chosen as the exclusive provider of specific components for the Scaled rocket motor for world-renowned aircraft designer Burt Rutan's revolutionary manned SpaceShipOne. The SpaceDev hybrid propulsion system, which is safe, low-cost and the largest of its kind in the world, burns a combination of rubber and laughing gas. |
![]() |
|
The content herein, unless otherwise known to be public domain, are Copyright 1995-2006 - SpaceDaily.AFP and UPI Wire Stories are copyright Agence France-Presse and United Press International. ESA PortalReports are copyright European Space Agency. All NASA sourced material is public domain. Additionalcopyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by SpaceDaily on any Web page published or hosted by SpaceDaily. Privacy Statement |