NASA's Roman Space Telescope Selects 24 Flight-Quality Heat-Vision 'Eyes'

NASA's Nancy Grace Roman Space Telescope team recently flight-certified all 24 of the detectors the mission needs. When Roman launches in the mid-2020s, these devices will convert starlight into electrical signals, which will then be decoded into 300-megapixel images of large patches of the sky. These images will allow astronomers to explore a vast array of celestial objects and phenomena, bringing us closer to solving many pressing cosmic mysteries.

"As the telescope's eyes, Roman's detectors will enable all of the mission's science," said John Gygax, the focal plane system manager for the Roman Space Telescope at NASA's Goddard Space Flight Center in Greenbelt, Maryland. "Now, based on our testing results, our team can confirm these infrared detectors meet all the requirements for Roman's purposes."

Each detector has 16 million tiny pixels, providing the mission with exquisite image resolution. While 18 detectors will be incorporated into Roman's camera, another six will be reserved as flight-qualified spares.

"The heart of Roman's detectors are millions of mercury-cadmium-telluride photodiodes, which are sensors that convert light into an electrical current - one for each pixel," said Greg Mosby, a research astrophysicist at Goddard who is helping assess the performance of Roman's detectors. "One of the reasons we chose this material is because by varying the amount of cadmium, we can tune the detector to have a specific cutoff wavelength. That allows us to focus more precisely on the wavelengths of light we're trying to see."

To make the detectors, technicians at Teledyne Imaging Sensors in Camarillo, California built up the photodiodes on the base of the detector layer by layer. Then, they secured the detector to a silicon electronics board that will help process the light signals using indium - a soft metal that has roughly the same consistency as chewing gum. The pixels were glued down using a tiny drop of indium for each one.

The drops were meticulously placed just 10 microns apart - about the width of a typical cotton fiber. If we scaled one of Roman's detectors up to be as long as an Olympic-size swimming pool, the indium blobs would be less than half an inch apart. This precise alignment ensures that each of the sensors will operate independently.

"The Roman team has spent years identifying an optimal recipe for the mission's detectors," Mosby said. "It's gratifying to see the team's hard work pay off on this crucial technical aspect of the mission. We can't wait to see how the images from these detectors transform our understanding of the universe."

Hubble's wide-eyed cousin
Combining so many detectors and pixels gives Roman its wide field of view, enabling the mission to create infrared images that will be around 200 times larger than Hubble can provide while revealing the same level of rich detail. The spacecraft is expected to collect far more data than any other NASA astrophysics mission before it. Scientists had to develop new processes that will compress and digitize the mission's downpour of data.

Goddard engineers also pioneered novel testing methods to ensure the detectors will meet the mission's needs. Roman requires extremely sensitive detectors to see faint signals from far across the cosmos. But it isn't easy to create detectors that meet the mission's strict quality requirements.

The team knew that not all of the detectors would pass their stringent tests, so they ordered more than the mission requires and will use the best ones. But the extra detectors won't go to waste - some are destined to serve as the eyes of other telescopes that have more lenient requirements, while others will be used for additional testing on the ground.

Staying cool
Roman will create enormous, high-resolution panoramas of the infrared universe, building on the Spitzer Space Telescope's groundbreaking observations and complementing the James Webb Space Telescope. Viewing space in infrared light is like using heat-vision goggles, helping us spot things we wouldn't be able to see otherwise. But doing so requires precise and extremely cold detectors.

"Space is very dark, and everything gives off infrared light according to its temperature," said Dominic Benford, the Roman program scientist at NASA Headquarters. "Roman's telescope, camera, and detectors all have to be cooled so that they are darker than the universe they'll be looking at."

Since we can detect infrared light as heat, Roman's detectors will have to be supercooled to a frigid -288 degrees Fahrenheit (-178 degrees Celsius). Otherwise heat from the spacecraft's own components would saturate the detectors, effectively blinding the telescope. A radiator will redirect waste heat from the spacecraft components away from the detectors out into cold space, ensuring that Roman will be sensitive to faint signals from distant galaxies and other cosmic objects.

The combination of Roman's fine resolution and enormous images has never been possible on a space-based telescope before and will make the Nancy Grace Roman Space Telescope an indispensable tool in the future.

Related Links
Roman Space Telescope
Stellar Chemistry, The Universe And All Within It

Tweet

Thanks for being there;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.

SpaceDaily Monthly Supporter
$5+ Billed Monthly

paypal only

SpaceDaily Contributor
$5 Billed Once

credit card or paypal

A revolutionary method to drastically reduce stray light on space telescopes
Liege, Belgium (SPX) Jun 04, 2021
A team of researchers at the Centre Spatial de Liege (CSL) of the University of Liege has just developed a method to identify the contributors and origins of stray light on space telescopes. This is a major advance in the field of space engineering that will help in the acquisition of even finer space images and the development of increasingly efficient space instruments. This study has just been published in the journal Scientific Reports. Space telescopes are becoming more and more powerfu ... read more