. 24/7 Space News .
TECH SPACE
Mesh reflector for shaped radio beams
by Staff Writers
Paris (ESA) Sep 18, 2020

"This 2.6-m 'breadboard' prototype proves the concept at C-band frequency, and the RF measurements have shown good correlation with radio-frequency and mechanical predictions" adds Jean-Christophe.

This prototype 2.6-m diameter metal-mesh antenna reflector represents a big step forward for the European space sector: versions can be manufactured to reproduce any surface pattern that antenna designers wish, something that was previously possible only with traditional solid antennas.

"This is really a first for Europe," says ESA antenna engineer Jean-Christophe Angevain. "China and the US have also been working hard on similar shaped mesh reflector technology. It is needed so that sufficiently large antennas can be deployed in orbit, which would otherwise be too bulky to fit inside a launcher fairing, while also meeting required performance levels."

ESA's AMPER (Advanced techniques for mesh reflector with improved radiation pattern performance) project performed with Large Space Structures GmbH in Germany as prime and TICRA in Denmark as subcontractor.

Antenna reflectors for satellites are often surprisingly 'lumpy' looking. Their basic paraboloid convex shape is distorted with additional peaks and valleys. These serve to contour the resulting radio frequency beam, typically to boost signal gain over target countries and minimise it beyond their borders.

"This tailored surface shaping is traditionally done with traditional metal or carbon fibre reinforced plastic composite reflectors," adds Jean-Christophe.

"The challenge was how to reproduce such shaping using a mesh reflector design. The obvious solution would have been a conventional tension truss double layer solution, with the mesh held together tautly on an alternating 'push and 'pull' basis. A smart alternative solution has been proposed and followed by the team."

Leri Datashvili, CEO and Chief Designer of Large Space Structures explains: "The design of our shaped mesh reflector is based on tension members supported by a peripheral truss structure which enables decoupling of the shaped surface and the structure. Therefore, the design can be implemented for any size of reflector, for any frequencies ranging from P-band to Ka-band. Furthermore, either deployable or fixed reflector technology can be realised."

"This 2.6-m 'breadboard' prototype proves the concept at C-band frequency, and the RF measurements have shown good correlation with radio-frequency and mechanical predictions" adds Jean-Christophe.

The AMPER project was supported through ESA's Technology Development Element, with prototype testing carried out in ESA's Hertz chamber at its ESTEC technical centre in the Netherlands. As a next step the AMPER team plan to produce a deployable version, aimed at Earth observation as well as telecommunications uses.

Meanwhile this prototype reflector will be on show during next month's virtual ESA Open Day at ESTEC.


Related Links
AMPER at ESA
Space Technology News - Applications and Research


Thanks for being there;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Monthly Supporter
$5+ Billed Monthly


paypal only
SpaceDaily Contributor
$5 Billed Once


credit card or paypal


TECH SPACE
Announcing Homestead: satellite ground station coming soon to Chippewa County
Kinross MI (SPX) Sep 15, 2020
Oakman Aerospace, Inc. (OAI) and Chippewa County Economic Development Corporation (CCEDC) are pleased to announce a partnership to establish a ground station, referred to as the Homestead ground station, at Chippewa County International Airport (CIU). The Homestead ground station, expected to be fully assembled by first-quarter 2021, will utilize a high-gain 5.5-meter parabolic dish antenna supporting S-band uplink and downlink as well as X-band downlink for satellite communications and data proce ... read more

Comment using your Disqus, Facebook, Google or Twitter login.



Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle

TECH SPACE
NASA's Partnership Between Art and Science: A Collaboration to Cherish

Israeli tech start-ups take on the Emirates

ISS may need to evade US Military cubesat

NASA Goddard's first virtual interns reflect on their summer experience

TECH SPACE
Air Force destroys surrogate cruise missile in hypervelocity projectile test

China's launch of new satellite fails

UK Spaceports form historic alliance

Northrop Grumman and NASA donate Shuttle boosters to California Science Center

TECH SPACE
Using chitin to manufacture tools and shelters on Mars

Study shows difficulty in finding evidence of life on Mars

China's Mars probe travels 137 mln km

ERC Space and Robotics Event 2020

TECH SPACE
China sends nine satellites into orbit by sea launch

Chinese spacecraft launched mystery object into space before returning to Earth

China's reusable spacecraft returns to Earth after 2 days

Mars-bound Tianwen 1 hits milestone

TECH SPACE
Dragonfly Aerospace emerges from SCS Aerospace Group

COMSAT expands hardware footprint with new Orbit Communications Systems agreement

Wanted: your ideas for ESA's future space missions

GMV announces the merger of its UK Company and NSL

TECH SPACE
Zombie satellites and rogue debris threatening existence of ISS

Making waves in space

Government backs UK companies tackling dangerous 'space junk'

Earth's Van Allen radiation belts double as particle accelerator

TECH SPACE
A white dwarf's surprise planetary companion

Scientists find gas on Venus linked to life on Earth

How protoplanetary rings form in primordial gas clouds

NASA missions spy first possible survivor planet hugging white dwarf star

TECH SPACE
Jupiter's moons could be warming each other

Astronomers characterize Uranian moons using new imaging analysis

Atomistic modelling probes the behavior of matter at the center of Jupiter

Technology ready to explore subsurface oceans on Ganymede









The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.