Finding alternatives to diamonds for drilling
by Staff Writers
Washington DC (SPX) Jul 24, 2019
Diamonds aren't just a girl's best friend - they're also crucial components for hard-wearing industrial components, such as the drill bits used to access oil and gas deposits underground. But a cost-efficient method to find other suitable materials to do the job is on the way.
Diamond is one of the only materials hard and tough enough for the job of constant grinding without significant wear, but as any imminent proposee knows, diamonds are pricey. High costs drive the search for new hard and superhard materials. However, the experimental trial-and-error search is itself expensive.
A simple and reliable way to predict new material properties is needed to facilitate modern technology development. Using a computational algorithm, Russian theorists have published just such a predictive tool in the Journal of Applied Physics, from AIP Publishing.
"Our study outlines a picture that can guide experimentalists, showing them the direction to search for new hard materials," said the study's first author Alexander Kvashnin, from the Skolkovo Institute of Science and Technology and Moscow Institute of Physics and Technology.
As fiber optics, with its fast transmission rate, replaced copper wire communications, so too do materials scientists search to find new materials with desirable properties to support modern technology. When it comes to the mining, space and defense industries, it's all about finding materials that don't break easily, and for that, the optimal combination of hardness and fracture toughness is required. But it's tricky to theoretically predict hardness and fracture toughness. Kvashnin explained that although lots of predictive models exist, he estimates they are 10%-15% out off the mark at best.
The Russian team recently developed a computational approach that considers all possible combinations of elements in Dmitri Mendeleev's periodic table - christened "Mendelevian search." They've used their algorithm to search for optimal hard and tough materials.
By combining their toughness prediction model with two well-known models for material hardness, the scientists' algorithm learned which regions of chemical space of compounds were most promising for tough, hard phases that could be easily synthesized.
Results were plotted on a "treasure map" of toughness vs. hardness, and the scientists were impressed by what they saw. All known hard materials were predicted with more than 90% accuracy. This proved the search's predictive power, and the newly revealed combinations are potential treasures for industry.
Kvashnin explained he is part of an industrial project devoted to new materials for drilling bits, where experimentalists are now synthesizing one of these hard material treasures - tungsten pentaboride (WB5).
"This computational search is a potential way to optimize the search for new materials, much cheaper, faster and quite accurately," said Kvashnin, who hopes that this new approach will enable the speedy development of new materials with enhanced properties.
But they aren't stopping there with the theory. They want to use their modern methods and approaches to pin down the general rules for what makes hard and superhard materials among the elements to better guide researchers of the future.
Research Report: "Computational discovery of hard and superhard materials"
Perseverance is key to NASA's advancement of alloys for bearings and gears
Cleveland OH (SPX) Jul 11, 2019
For 15 years, Christopher DellaCorte has spent much "quality time" with Nitinol alloys. It started in 2004, when Glenn Glennon - an employee of Connecticut's Abbott Ball Company - talked to DellaCorte about applying Nitinol (a nickel-titanium alloy) to ball bearings. Conventional ball bearings are prone to rusting and denting when subjected to extreme environments, especially during aerospace flight. But Nitinol is different than traditional bearing steel. Nitinol is made by combining nickel ... read more
|The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.