Creating better devices: The etch stops here
by Staff Writers
Urbana IL (SPX) Nov 09, 2018

Nanoelectronic devices made from atomically thin materials on a silicon chip.

A team of multi-disciplinary scientists and engineers at the University of Illinois at Urbana-Champaign have discovered a new, more precise, method to create nanoscale-size electromechanical devices. Their research findings are published in Nature Communications.

"In the last five years, there has been a huge gold rush where researchers figured out we could make 2D materials that are naturally only one molecule thick but can have many different electronic properties, and by stacking them on top of each other, we could engineer nearly any electronic device at molecular sizes," said Arend van der Zande, professor of mechanical science and engineering.

"The challenge was, though we could make these structures down to a few molecules thick, we couldn't pattern them," he said.

At any scale of electronic device, layers are etched away in precise patterns to control how the current flows. "This concept underlies many technologies, like integrated circuits. However, the smaller you go, the harder this is to do," said van der Zande.

"For example, how do you make electrical contact on molecular layer three and five, but not on layer four at the atomic level?"

A serendipitous discovery led to a method for doing just that.

As a new postdoctoral researcher in van der Zande's lab, Jangyup Son was running some experiments on single layers of graphene using Xenon difluoride, XeF2, when he happened to "throw in" another material on hand: hexagonal Boron Nitride (hBN), an electrical insulator.

"Jangyup shoved both materials into the etching chamber at the same time, and what he saw was that a single layer of graphene was still there, but a thick piece of hBN was completely etched away by the Xenon difluoride."

This accidental discovery led the team to see where they could apply graphene's ability to withstand the etching agent.

"This discovery allowed us to pattern two-dimensional structures by placing layers of graphene between other materials, such as hexagonal boron nitride (hBN), transition metal dichalcogenides (TMDCs), and black phosphorus (BP), to selectively and precisely etch one layer without etching the layer underneath."

Graphene, when exposed to the etching agent XeF2, retains its molecular structure and masks, or protects, the layer below and actually stops the etch.

"What we've discovered is a way to pattern complicated structures down to a molecular and atomic scale," he said.

To explore the strengths of the new technique, the group created a simple graphene transistor to test its performance relative to traditionally made graphene transistors, which are currently patterned in a way that induces disorder in the material, degrading their performance.

"Because these molecules are all surface, if you have it sitting on anything with any disorder at all, it messes up the ability for the electrons to move through the material and thus the electronic performance," said van der Zande. "In order to make the best device possible, you need to encapsulate the graphene molecule in another two-dimensional material such as insulating hBN to keep it super flat and clean."

This is where the new technique is so useful. The graphene molecule can remain encapsulated and pristine, while withstanding the etching needed to make contact with the material, thereby preserving the material's properties.

As proof of concept, the transistors made using the new technique out-performed all other transistors, "making them the best graphene transistors so far demonstrated in the literature."

The next steps, said van der Zande, are to see how scalable the technique is and whether it will enable previously impossible devices. Can we take advantage of the self-arresting nature of this technique to make a million identical transistors rather than just one? Can we pattern devices down to the nanoscale in all three dimensions at the same time to make nanoribbons without any disorder?

"Now that we have a way of minimizing the disorder within the material, we are exploring ways to make smaller features because we can do encapsulation and patterning at the same time," he said. "Normally, when you try to make smaller features like nanoribbons of 2D materials the disorder begins to dominate, so the devices do not work properly."

"The graphene etch stop, as the technique is called, will make the entire process of building devices easier."

Research paper

Related Links
University of Illinois College of Engineering
Space Technology News - Applications and Research

Flow units: Dynamic defects in metallic glasses
Beijing, China (SPX) Nov 08, 2018
In a crystal, structural defects such as dislocations or twins are well defined and largely determine the mechanical and other properties. These defects can be easily identified as the broken long-range atomic order. However, the lack of a periodic microstructure makes the searching of similar structural defects a difficult task in amorphous materials. Recent studies found that amorphous materials are intrinsically spatially and temporally heterogeneous, which implies the possibility to identify t ... read more

Comment using your Disqus, Facebook, Google or Twitter login.

Share this article via these popular social media networks DiggDigg RedditReddit GoogleGoogle

Experience high-res science in first 8K footage from space

Roscosmos, NASA to adjust ISS program to fit with lunar missions

Russia plans first manned launch to ISS Dec 3 after accident

Thrusters with additively manufactured components qualified to fly humans on Orion spacecraft

Simulating hypersonic flow transitions from smooth to turbulent

Hole in Soyuz MS-09 hull could have been drilled before launch

Rocket Lab enters high frequency launch operations

Soyuz launch failed due to assembly problem: Russia

Water cycle along the northern rim of Hellas Basin throughout Mars' history

Five things to know about InSight's Mars landing

Naturally occurring 'batteries' fueled organic carbon synthesis on Mars

NASA launches a new podcast to Mars

China's space programs open up to world

China's commercial aerospace companies flourishing

China launches Centispace-1-s1 satellite

China tests propulsion system of space station's lab capsules

Telstar 18 VANTAGE satellite now operational over Asia Pacific

How Max Polyakov from Zaporozhie develops the Ukrainian space industry

SpaceFund launches the world's first space security token to fund the opening of the high frontier

ESA on the way to Space19+ and beyond

Doing the wave: how stretchy fluids react to wavy surfaces

Video game action heads for the cloud

Making steps toward improved data storage

Flow units: Dynamic defects in metallic glasses

NASA retires Kepler Space Telescope, passes planet-hunting torch

Rocky and habitable - sizing up a galaxy of planets

Some planetary systems just aren't into heavy metal

Giant planets around young star raise questions about how planets form

SwRI team makes breakthroughs studying Pluto orbiter mission

ALMA maps temperature of Jupiter's icy moon Europa

NASA's Juno Mission Detects Jupiter Wave Trains

WorldWide Telescope looks ahead to New Horizons' Ultima Thule glyby