Subscribe free to our newsletters via your
. 24/7 Space News .




ENERGY TECH
Stanford team builds stable lithium anode
by Staff Writers
Stanford CA (SPX) Jul 29, 2014


All batteries have three basic components: an electrolyte to provide electrons, an anode to discharge those electrons, and a cathode to receive them.

Engineers across the globe have been racing to design smaller, cheaper and more efficient rechargeable batteries to meet the power storage needs of everything from handheld gadgets to electric cars.

In a paper published in the journal Nature Nanotechnology, researchers at Stanford University report that they have taken a big step toward accomplishing what battery designers have been trying to do for decades - design a pure lithium anode.

All batteries have three basic components: an electrolyte to provide electrons, an anode to discharge those electrons, and a cathode to receive them.

Today, we say we have lithium batteries, but that is only partly true. What we have are lithium ion batteries. The lithium is in the electrolyte, but not in the anode. An anode of pure lithium would be a huge boost to battery efficiency.

"Of all the materials that one might use in an anode, lithium has the greatest potential. Some call it the Holy Grail," said Yi Cui, a professor of Material Science and Engineering and leader of the research team. "It is very lightweight and it has the highest energy density. You get more power per volume and weight, leading to lighter, smaller batteries with more power."

But engineers have long tried and failed to reach this Holy Grail.

"Lithium has major challenges that have made its use in anodes difficult. Many engineers had given up the search, but we found a way to protect the lithium from the problems that have plagued it for so long," said Guangyuan Zheng, a doctoral candidate in Cui's lab and first author of the paper.

In addition to Zheng, the research team includes Steven Chu, the former U.S. Secretary of Energy and Nobel Laureate who recently resumed his professorship at Stanford.

"In practical terms, if we can improve the capacity of batteries to, say, four times today's, that would be exciting. You might be able to have cell phone with double or triple the battery life or an electric car with a range of 300 miles that cost only $25,000-competitive with an internal combustion engine getting 40 mpg," Chu said.

The engineering challenge
In the paper, the authors explain how they are overcoming the problems posed by lithium. Most lithium ion batteries, like those you might find in your smart phone or hybrid car, work similarly.

The key components include an anode, the negative pole from which electrons flow out and into a power-hungry device, and the cathode, where the electrons re-enter the battery once they have traveled through the circuit.

Separating them is an electrolyte, a solid or liquid loaded with positively charged lithium ions that travel between the anode and cathode.

During charging, the positively charged lithium ions in the electrolyte are attracted to the negatively charged anode and the lithium accumulates on the anode. Today, the anode in a lithium ion battery is actually made of graphite or silicon.

Engineers would like to use lithium for the anode, but so far they have been unable to do so. That's because the lithium ions expand as they gather on the anode during charging.

All anode materials, including graphite and silicon, expand somewhat during charging, but not like lithium. Researchers say that lithium's expansion during charging is "virtually infinite" relative to the other materials. Its expansion is also uneven, causing pits and cracks to form in the outer surface, like paint on the exterior of a balloon that is being inflated.

The resulting fissures on the surface of the anode allow the precious lithium ions to escape, forming hair-like or mossy growths, called dendrites. Dendrites, in turn, short circuit the battery and shorten its life.

Preventing this buildup is the first challenge of using lithium for the battery's anode.

The second engineering challenge is that a lithium anode is highly chemically reactive with the electrolyte. It uses up the electrolyte and reduces battery life.

An additional problem is that the anode and electrolyte produce heat when they come into contact. Lithium batteries, including those in use today, can overheat to the point of fire, or even explosion, and are, therefore, a serious safety concern. The recent battery fires in Tesla cars and on Boeing's Dreamliner are prominent examples of the challenges of lithium ion batteries.

Building the nanospheres
To solve these problems the Stanford researchers built a protective layer of interconnected carbon domes on top of their lithium anode. This layer is what the team has called nanospheres

The Stanford team's nanosphere layer resembles a honeycomb: it creates a flexible, uniform and non-reactive film that protects the unstable lithium from the drawbacks that have made it such a challenge. The carbon nanosphere wall is just 20 nanometers thick. It would take some 5,000 layers stacked one atop another to equal the width of single human hair.

"The ideal protective layer for a lithium metal anode needs to be chemically stable to protect against the chemical reactions with the electrolyte and mechanically strong to withstand the expansion of the lithium during charge," Cui said.

The Stanford nanosphere layer is just that. It is made of amorphous carbon, which is chemically stable, yet strong and flexible so as to move freely up and down with the lithium as it expands and contracts during the battery's normal charge-discharge cycle.

Ideal within reach
In technical terms, the nanospheres improve the coulombic efficiency of the battery-a ratio of the amount of lithium that can be extracted from the anode when the battery is in use compared to the amount put in during charging. A single round of this give-and-take process is called a cycle.

Generally, to be commercially viable, a battery must have a coulombic efficiency of 99.9 percent or more, ideally over as many cycles as possible. Previous anodes of unprotected lithium metal achieved approximately 96 percent efficiency, which dropped to less than 50 percent in just 100 cycles-not nearly good enough. The Stanford team's new lithium metal anode achieves 99 percent efficiency even at 150 cycles.

"The difference between 99 percent and 96 percent, in battery terms, is huge. So, while we're not quite to that 99.9 percent threshold, where we need to be, we're close and this is a significant improvement over any previous design," Cui said. "With some additional engineering and new electrolytes, we believe we can realize a practical and stable lithium metal anode that could power the next generation of rechargeable batteries."

.


Related Links
Stanford School of Engineering
Powering The World in the 21st Century at Energy-Daily.com






Comment on this article via your Facebook, Yahoo, AOL, Hotmail login.

Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle




Memory Foam Mattress Review
Newsletters :: SpaceDaily :: SpaceWar :: TerraDaily :: Energy Daily
XML Feeds :: Space News :: Earth News :: War News :: Solar Energy News





ENERGY TECH
Improving the cost and efficiency of renewable energy storage
Lausanne, Switzerland (SPX) Jul 22, 2014
A major challenge in renewable energy is storage. A common approach is a reaction that splits water into oxygen and hydrogen, and uses the hydrogen as a fuel to store energy. The efficiency of 'water splitting' depends heavily on a solid substance called a catalyst. However, only the surface of the catalyst acts on the reaction, while its bulk is i ... read more


ENERGY TECH
China's biggest moon challenge: returning to earth

Lunar Pits Could Shelter Astronauts, Reveal Details of How 'Man in the Moon' Formed

Manned mission to Moon scheduled by Roscosmos for 2020-2031

Landsat Looks to the Moon

ENERGY TECH
NASA Seeks Proposals for Commercial Mars Data Relay Satellites

Emirates paves way for Middle East space program with mission to Mars

Curiosity's images show Earth-like soils on Mars

India could return to Mars as early as 2017

ENERGY TECH
Sierra Nevada Completes Major Dream Chaser NASA CCiCap Milestone

NASA Partners Punctuate Summer with Spacecraft Development Advances

Voyager Spacecraft Might Not Have Reached Interstellar Space

New Fort Knox: A means to a solar-system-wide economy

ENERGY TECH
China to launch HD observation satellite this year

Lunar rock collisions behind Yutu damage

China's Fast Track To Circumlunar Mission

Chinese moon rover designer shooting for Mars

ENERGY TECH
Russian Cargo Craft Launches for 6-Hour Trek to ISS

ISS Crew Opens Cargo Ship Hatch, Preps for CubeSat Deployment

Russian cargo craft docks with ISS, science satellite fails

ATV-5: loaded and locked

ENERGY TECH
China to launch satellite for Venezuela

SpaceX Soft Lands Falcon 9 Rocket First Stage

SpaceX Falcon 9 v1.1 Flights Deemed Successful

ISS 'space truck' launch postponed: Arianespace

ENERGY TECH
'Challenges' in quest to find water on Earth-like worlds: study

Transiting Exoplanet with Longest Known Year

Brown Dwarfs May Wreak Havoc on Orbits of Nearby Planets

NASA Mission To Reap Bonanza of Earth-sized Planets

ENERGY TECH
Laser experiment reveals liquid-like motion of atoms in an ultra-cold cluster

Amazon launches 3D printing store

Carbyne morphs when stretched

Diode laser strong enough to cut metal developed by former MIT scientists




The content herein, unless otherwise known to be public domain, are Copyright 1995-2014 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement All images and articles appearing on Space Media Network have been edited or digitally altered in some way. Any requests to remove copyright material will be acted upon in a timely and appropriate manner. Any attempt to extort money from Space Media Network will be ignored and reported to Australian Law Enforcement Agencies as a potential case of financial fraud involving the use of a telephonic carriage device or postal service.