Subscribe free to our newsletters via your
. 24/7 Space News .

Stanford, MIT scientists find new way to harness waste heat
by Staff Writers
Stanford CA (SPX) May 23, 2014

Stanford and MIT researchers have developed a four-stage process that uses waste heat to charge a battery. First, an uncharged battery is heated by waste heat. Then, while the battery is still warm, a voltage is applied. When fully charged, the battery is allowed to cool, which increases the voltage. Once the battery has cooled, it actually delivers more electricity than was used to charge it. Image courtesy Jose-Luis Olivares and MIT News Office.

Vast amounts of excess heat are generated by industrial processes and by electric power plants. Researchers around the world have spent decades seeking ways to harness some of this wasted energy. Most such efforts have focused on thermoelectric devices - solid-state materials that can produce electricity from a temperature gradient - but the efficiency of such devices is limited by the availability of materials.

Now researchers at Stanford University and the Massachusetts Institute of Technology have found a new alternative for low-temperature waste-heat conversion into electricity - that is, in cases where temperature differences are less than 100 degrees Celsius.

The new approach is described in a study, published in the journal Nature Communications, by Seok Woo Lee and Yi Cui at Stanford and Yuan Yang and Gang Chen at MIT.

"Virtually all power plants and manufacturing processes, like steelmaking and refining, release tremendous amounts of low-grade heat to ambient temperatures," said Cui, an associate professor of materials science and engineering. "Our new battery technology is designed to take advantage of this temperature gradient at the industrial scale."

Voltage and temperature
The new Stanford-MIT system is based on the principle known as the thermogalvanic effect, which states that the voltage of a rechargeable battery is dependent on temperature. "To harvest thermal energy, we subject a battery to a four-step process: heating up, charging, cooling down and discharging," said Lee, a postdoctoral scholar at Stanford and co-lead author of the study.

First, an uncharged battery is heated by waste heat. Then, while the battery is still warm, a voltage is applied. Once fully charged, the battery is allowed to cool. Because of the thermogalvanic effect, the voltage increases as the temperature decreases. When the battery has cooled, it actually delivers more electricity than was used to charge it. That extra energy doesn't appear from nowhere, explained Cui. It comes from the heat that was added to the system.

The Stanford-MIT system aims at harvesting heat at temperatures below 100 C, which accounts for a major part of potentially harvestable waste heat. "One-third of all energy consumption in the United States ends up as low-grade heat," said co-lead author Yang, a postdoc at MIT.

In the experiment, a battery was heated to 60 C, charged and cooled. The process resulted in an electricity-conversion efficiency of 5.7 percent, almost double the efficiency of conventional thermoelectric devices.

This heating-charging-cooling approach was first proposed in the 1950s at temperatures of 500 C or more, said Yang, noting that most heat recovery systems work best with higher temperature differences.

"A key advance is using material that was not around at that time" for the battery electrodes, as well as advances in engineering the system, said co-author Chen, a professor of mechanical engineering at MIT.

"This technology has the additional advantage of using low-cost, abundant materials and manufacturing processes that are already widely used in the battery industry," added Lee.

'Clever idea'
While the new system has a significant advantage in energy-conversion efficiency over conventional thermoelectric devices, it has a much lower power density - that is, the amount of power that can be delivered for a given weight. The new technology also will require further research to assure long-term reliability and improve the speed of battery charging and discharging, Chen added. "It will require a lot of work to take the next step."

There is currently no good technology that can make effective use of the relatively low-temperature differences this system can harness, Chen said. "This has an efficiency we think is quite attractive. There is so much of this low-temperature waste heat, if a technology can be created and deployed to use it."

The results are very promising, said Peidong Yang, a professor of chemistry at the University of California, Berkeley, who was not involved in the study. "By exploring the thermogalvanic effect, [the MIT and Stanford researchers] were able to convert low-grade heat to electricity with decent efficiency," he said. "This is a clever idea, and low-grade waste heat is everywhere."

Other authors of the study are Hyun-Wook Lee of Stanford and Hadi Ghasemi and Daniel Kraemer of MIT.

The Stanford work was partially funded by the U.S. Department of Energy (DOE), the SLAC National Accelerator Laboratory and the National Research Foundation of Korea. The MIT work was partially funded by the DOE, in part through the Solid-State Solar-Thermal Energy Conversion Center.


Related Links
Powering The World in the 21st Century at

Comment on this article via your Facebook, Yahoo, AOL, Hotmail login.

Share this article via these popular social media networks DiggDigg RedditReddit GoogleGoogle

Memory Foam Mattress Review
Newsletters :: SpaceDaily :: SpaceWar :: TerraDaily :: Energy Daily
XML Feeds :: Space News :: Earth News :: War News :: Solar Energy News

Cree Power Module Breaks Price-Performance Barrier in Power Conversion Systems
Durham NC (SPX) May 20, 2014
Cree's silicon-carbide (SiC) technology continues to enable smaller, lighter, more efficient and lower-cost power systems with a new all-SiC 300A, 1.2kV half-bridge module. Packaged in industry-standard 62mm housing, the new module reduces energy loss due to switching by more than five times compared to the equivalent silicon solution. This best-in-class efficiency enables for the first ti ... read more

LRO View of Earth

Saturn in opposition tonight, will appear next to the moon

Russia to begin Moon colonization in 2030

Astrobotic Partners With NASA To Develop Robotic Lunar Landing Capability

When fantasy becomes reality: first seeds to be planted soon on Mars

NASA's Saucer-Shaped Craft Preps for Flight Test

NASA Mars Rover Curiosity Wrapping Up Waypoint Work

Cascading dunes in a martian crater

Britain's Longitude Prize back after 300-year absence

Sea level rise forces US space agency to retreat

A light-speed voyage to the distant future

US spacecraft enters giant asteroid's orbit

Moon rover Yutu comes closer to public

The Phantom Tiangong

New satellite launch center to conduct joint drill

China issues first assessment on space activities

New ISS Expedition Unaffected by Proton Crash

US-Russian Tensions Roiling Outer Space Cooperation

Rounding up the BCATs on the ISS

Botanical Studies, Dragon Departure Preps for ISS Crew

SpaceX-3 Mission To Return Dragon's Share of Space Station Science

SpaceX supply capsule heads back to Earth

SpaceX's Dragon spacecraft returns to Earth from space station

Replacing Russian-made rocket engines is not easy

Giant telescope tackles orbit and size of exoplanet

Odd planet, so far from its star

New Exomoon Hunting Technique Could Find Solar System-like Moons

Length of Exoplanet Day Measured for First Time

Is there really cash in your company's trash?

Computer simulations enable better calculation of interfacial tension

Professors' super waterproof surfaces cause water to bounce like a ball

New Technique Safely Penetrates Top Coat for Perfect Paint Job

The content herein, unless otherwise known to be public domain, are Copyright 1995-2014 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement All images and articles appearing on Space Media Network have been edited or digitally altered in some way. Any requests to remove copyright material will be acted upon in a timely and appropriate manner. Any attempt to extort money from Space Media Network will be ignored and reported to Australian Law Enforcement Agencies as a potential case of financial fraud involving the use of a telephonic carriage device or postal service.