. 24/7 Space News .
NANO TECH
Nanodevices at one-hundredth the cost
by Staff Writers
Boston MA (SPX) Dec 24, 2015


External row of seven emitters that are part of a 49-emitter array. The scalloping on the exterior of the emitters, due to the layer-by-layer manufacturing, is visible. Image courtesy Anthony Taylor and Luis F Velasquez-Garcia.

Microelectromechanical systems - or MEMS - were a $12 billion business in 2014. But that market is dominated by just a handful of devices, such as the accelerometers that reorient the screens of most smartphones.

That's because manufacturing MEMS has traditionally required sophisticated semiconductor fabrication facilities, which cost tens of millions of dollars to build. Potentially useful MEMS have languished in development because they don't have markets large enough to justify the initial capital investment in production.

Two recent papers from researchers at MIT's Microsystems Technologies Laboratories offer hope that that might change. In one, the researchers show that a MEMS-based gas sensor manufactured with a desktop device performs at least as well as commercial sensors built at conventional production facilities.

In the other paper, they show that the central component of the desktop fabrication device can itself be built with a 3-D printer. Together, the papers suggest that a widely used type of MEMS gas sensor could be produced at one-hundredth the cost with no loss of quality.

The researchers' fabrication device sidesteps many of the requirements that make conventional MEMS manufacture expensive.

"The additive manufacturing we're doing is based on low temperature and no vacuum," says Luis Fernando Velasquez-Garcia, a principal research scientist in MIT's Microsystems Technology Laboratories and senior author on both papers.

"The highest temperature we've used is probably 60 degrees Celsius. In a chip, you probably need to grow oxide, which grows at around 1,000 degrees Celsius. And in many cases the reactors require these high vacuums to prevent contamination. We also make the devices very quickly. The devices we reported are made in a matter of hours from beginning to end."

Welcome resistance
For years, Velasquez-Garcia has been researching manufacturing techniques that involve dense arrays of emitters that eject microscopic streams of fluid when subjected to strong electric fields.

For the gas sensors, Velasquez-Garcia and Anthony Taylor, a visiting researcher from the British company Edwards Vacuum, use so-called "internally fed emitters." These are emitters with cylindrical bores that allow fluid to pass through them.

In this case, the fluid contained tiny flakes of graphene oxide. Discovered in 2004, graphene is an atom-thick form of carbon with remarkable electrical properties. Velasquez-Garcia and Taylor used their emitters to spray the fluid in a prescribed pattern on a silicon substrate. The fluid quickly evaporated, leaving a coating of graphene oxide flakes only a few tens of nanometers thick.

The flakes are so thin that interaction with gas molecules changes their resistance in a measurable way, making them useful for sensing.

"We ran the gas sensors head to head with a commercial product that cost hundreds of dollars," Velasquez-Garcia says. "What we showed is that they are as precise, and they are faster. We make at a very low cost - probably cents - something that works as well as or better than the commercial counterparts."

To produce those sensors, Velasquez-Garcia and Taylor used electrospray emitters that had been built using conventional processes. However, in the December issue of the Journal of Microelectromechanical Systems, Velasquez-Garcia reports using an affordable, high-quality 3-D printer to produce plastic electrospray emitters whose size and performance match those of the emitters that yielded the gas sensors.

Made to order
In addition to making electrospray devices more cost-effective, Velasquez-Garcia says, 3-D printing also makes it easier to customize them for particular applications.

"When we started designing them, we didn't know anything," Velasquez-Garcia says.

"But at the end of the week, we had maybe 15 generations of devices, where each design worked better than the previous versions."

Indeed, Velasquez-Garcia says, the advantages of electrospray are not so much in enabling existing MEMS devices to be made more cheaply as in enabling wholly new devices. Besides making small-market MEMS products cost-effective, electrospray could enable products incompatible with existing manufacturing techniques.

"In some cases, MEMS manufacturers have to compromise between what they intended to make, based on the models, and what you can make based on the microfabrication techniques," Velasquez-Garcia says. "Only a few devices that fit into the description of having large markets and not having subpar performance are the ones that have made it."

Electrospray could also lead to novel biological sensors, Velasquez-Garcia says. "It allows us to deposit materials that would not be compatible with high-temperature semiconductor manufacturing, like biological molecules," he says.


Thanks for being here;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Contributor
$5 Billed Once


credit card or paypal
SpaceDaily Monthly Supporter
$5 Billed Monthly


paypal only


.


Related Links
Massachusetts Institute of Technology
Nano Technology News From SpaceMart.com
Computer Chip Architecture, Technology and Manufacture






Comment on this article via your Facebook, Yahoo, AOL, Hotmail login.

Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle

Previous Report
NANO TECH
Researchers demonstrate tracking of individual catalyst nanoparticles
Hamilton, Canada (SPX) Dec 22, 2015
Researchers from McMaster University in Hamilton, Ont., have taken atomic-level images of individual nanoparticles during heating that could lead to improved fuel-cell technologies at lower cost, reduce dependence on imported oil and minimize greenhouse gas emissions. Heating nanoparticles and atomic-level tracking allows for the development of other less expensive catalysts, such as plati ... read more


NANO TECH
Rare full moon on Christmas Day

LADEE Mission Shows Force of Meteoroid Strikes on Lunar Exosphere

XPRIZE verifies moon express launch contract, kicking off new space race

Gaia's sensors scan a lunar transit

NANO TECH
University researchers test prototype spacesuits at Kennedy

Marshall: Advancing the technology for NASA's Journey to Mars

Opportunity positioned on steeper slopes for another Martian winter

Martian gullies likely contain 'no water': study

NANO TECH
Researchers Recall Work on First Rendezvous in Space

NASA Accepting Applications for Future Explorers

China drives global patent applications to new high

Australia seeks 'ideas boom' with tax breaks, visa boosts

NANO TECH
Agreement with Chinese Space Tech Lab Will Advance Exploration Goals

China launches new communication satellite

China's indigenous SatNav performing well after tests

China launches Yaogan-29 remote sensing satellite

NANO TECH
Two whacks is all it takes for spacewalk repair

Unscheduled spacewalk likely on Monday

NASA spacewalk to fix ISS rail car

British astronaut docks with ISS as country cheers debut trip

NANO TECH
45th Space Wing launches ORBCOMM; historically lands first stage booster

SpaceX rocket landing opens 'new door' to space travel

NASA orders second Boeing Crew Mission to ISS

ESA and Arianespace ink James Webb Space Telescope launch contract

NANO TECH
Nearby star hosts closest alien planet in the 'habitable zone'

ALMA reveals planetary construction sites

Monster planet is 'dancing with the stars'

Exoplanets Water Mystery Solved

NANO TECH
UCLA researchers create exceptionally strong and lightweight new metal

Move aside carbon: Boron nitride-reinforced materials are even stronger

Super strong, lightweight metal could build tomorrow's spacecraft

BAE Systems to provide radar support for U.S. Air Force









The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.