 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| . |  |
. |
Marshall Gains Booster Separation Motor Testing Capability
Huntsville AL (SPX) Feb 20, 2006 Through an arrangement with an industry partner, NASA's Marshall Space Flight Center in Huntsville, Ala., is the new home for a space shuttle booster separation motor test stand. A static -- or stationary -- test stand was relocated to Marshall from San Jose, Calif., where Pratt & Whitney Rocketdyne previously manufactured and tested shuttle motors. The test stand will serve as an alternative platform for motor tests. The new supplier of booster separation motors, ATK Thiokol of Promontory, Utah, will begin qualification testing of shuttle booster separation motors to verify flight readiness. Testing at ATK Thiokol is expected to begin later this year. The test stand also will be available for future testing of NASA's next generation spacecraft, the crew exploration vehicle, which builds on shuttle technology. "The first two tests are scheduled for February at the Marshall Center's East Test Stand 19," said Jay Nichols, an engineer in Marshall's Solid Rocket Booster Project Office. "The initial test will verify proper test stand installation and data-collection capability." One motor will be fired at existing air temperature, and the second will be thermally conditioned at 120 degrees Fahrenheit. Each test firing will last 1.2 seconds -- the same length of time it takes for booster separation during actual shuttle launches. Test motors were pulled from NASA inventory at the Kennedy Space Center in Florida. Results are expected to demonstrate the booster separation motor test facility's capability by providing motor case pressure data and thrust measurement data. The motor performance data will be evaluated by comparing it to results from previous static tests. Booster separation motors weigh 177 pounds when loaded with propellant. Each is approximately 31 inches long and 12.8 inches in diameter. About two minutes into a space shuttle flight, 16 of these small, but powerful, motors are fired simultaneously for 1.2 seconds. This provides the precise thrust required to safely separate the spent boosters from the space shuttle's external tank and orbiter. Eight booster separation motors are attached to each of the shuttle's two reusable solid rocket boosters, four on the forward skirt and four on the aft skirt. The booster separation motors in each cluster are ignited while traveling through the atmosphere at more than 3,000 mph and an altitude of approximately 24 nautical miles. Related Links Marshall Space Flight Center Space Shuttle Program
Worlds Pledge To Halve Hunger By 2015 An Empty Promise
St Louis MO (SPX) Feb 20, 2006Almost 200 countries agreed in 1990 to cut worldwide hunger in half by 2015. That commitment is now looking like an empty promise -- all talk and no action -- according to a Cornell University expert on world hunger. If business proceeds as usual, just as many people will be hungry in the world -- 800 million -- in 2015 as there were 16 years ago, said Per Pinstrup-Andersen, Cornell's Babcock Professor of Food, Nutrition and Public Policy and the 2001 Food Prize laureate. |
|
|
| The content herein, unless otherwise known to be public domain, are Copyright 1995-2006 - SpaceDaily.AFP and UPI Wire Stories are copyright Agence France-Presse and United Press International. ESA PortalReports are copyright European Space Agency. All NASA sourced material is public domain. Additionalcopyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by SpaceDaily on any Web page published or hosted by SpaceDaily. Privacy Statement |
