 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| . |  |
. |
Lockheed Martin To Design Mars Science Lab Aeroshell
Denver CO (SPX) Mar 30, 2006 Lockheed Martin has been awarded a preliminary design and concept study start-up contract by the National Aeronautics and Space Administration's (NASA) Jet Propulsion Laboratory for the Mars Science Laboratory (MSL) aeroshell system. Lockheed Martin and NASA will soon enter negotiations to finalize the value of the contract. Scheduled for launch in the fall of 2009, the Mars Science Laboratory rover will support the Mars Exploration Program's strategy of "follow the water" and will have the science goals of determining whether the planet was ever habitable, characterizing the climate and geology of Mars, and preparing for human exploration. Lockheed Martin will design and build the aeroshell system, which includes the composite load carrying structure and the thermal protection system (TPS). The aeroshell is a blunt-nosed cone that will encapsulate and protect the MSL rover from the intense heat and friction that will be generated as the system descends through the Martian atmosphere. "Lockheed Martin's successful heritage with aeroshells and thermal protection systems spans more than three decades, starting with the Viking missions in the 1970s, and continuing with the Pathfinder, Genesis, Stardust and Mars Exploration Rovers missions," said Jim Crocker, Lockheed Martin Space Systems vice president of Civil Space. "Mars Science Lab will continue to build on the great science yielded by the Mars Exploration Rovers, Mars Odyssey, Mars Global Surveyor and soon Mars Reconnaissance Orbiter and Phoenix Lander." The MSL heatshield will be the largest ever built at about 4.5 meters (15 feet) in diameter. For comparison, the heatshields of the Mars Exploration Rovers measured 2.6 meters (8.5 feet) and Apollo capsule heatshields measured 3.9 meters (12.8 feet). Lockheed Martin is also drawing upon this expertise in its bid for NASA's Crew Exploration Vehicle that will utilize a capsule design 5 meters (16.5 feet) in diameter. The MSL heatshield will be made of a composite structure covered with a thermal protection system composed of the cork silicone super lightweight ablator (SLA) 561v. The backshell will be covered with a similar SLA 561s. The backshell structure provides the attachment points to the rover landing system and parachute system that is deployed after the capsule slows in the Martian atmosphere. The aeroshell provides protection to the MSL rover through the seven-month cruise to Mars and the fiery entry through the Martian atmosphere. It will also support the parachute and a "sky crane", a structure which will lower the rover to a "soft landing" on the surface of Mars. The MSL rover will be approximately five times heavier than the Mars Exploration Rovers. Related Links Lockheed Martin JPL
SpaceDev To Design Complex Nanosatellite For USAF Research Lab
Poway CA (SPX) Mar 30, 2006SpaceDev has been awarded a $1.25 million contract from the Air Force Research Laboratory Space Vehicles Directorate, for the preliminary design of a nanosatellite capable of independently providing localized Space Situational Awareness of the local space environment of a host satellite. |
|
|
| The content herein, unless otherwise known to be public domain, are Copyright 1995-2006 - SpaceDaily.AFP and UPI Wire Stories are copyright Agence France-Presse and United Press International. ESA PortalReports are copyright European Space Agency. All NASA sourced material is public domain. Additionalcopyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by SpaceDaily on any Web page published or hosted by SpaceDaily. Privacy Statement |
