by Staff Writers
Houston TX (SPX) May 29, 2017
Halfway into its planned two-year demonstration attached to the International Space Station, the Bigelow Expandable Activity Module, or BEAM, is showing that soft materials can perform as well as rigid materials for habitation volumes in space. The BEAM was launched and attached to station through a partnership between NASA's Advanced Exploration Systems Division (AES) and Bigelow Aerospace, headquartered in North Las Vegas, Nevada.
NASA and Bigelow are primarily evaluating characteristics directly related to the module's ability to protect humans from the harsh space environment. Astronauts aboard station work with researchers on the ground to monitor the module's structural integrity, thermal stability, and resistance to space debris, radiation, and microbial growth.
Researchers at NASA's Langley Research Center in Hampton, Virginia, continually analyze data from internal sensors designed to monitor and locate external impacts by orbital debris, and, as expected, have recorded a few probable micrometeoroid debris impacts so far. BEAM has performed as designed in preventing debris penetration with multiple outer protective layers exceeding space station shielding requirements.
Over the next several months, NASA and Bigelow will focus on measuring radiation dosage inside the BEAM. Using two active Radiation Environment Monitors (REM) inside the module, researchers at NASA's Johnson Space Center in Houston are able to take real-time measurements of radiation levels.
They have found that Galactic Cosmic Radiation (GCR) dose rates inside the BEAM are similar to other space station modules, and continue to analyze contributions to the daily dose from the Earth's trapped radiation belts to better understand the shielding properties of the module for application to long-term missions.
The space station and the BEAM enjoy a significant amount of protection from Earth's magnetosphere. Future deep space missions will be far more exposed to energized radiation particles speeding through the solar system, so NASA is actively working on ways to mitigate the effects of radiation events.
In late April, NASA's radiation researchers at Johnson began a multi-month BEAM radiation experiment by installing a .04 inch (1.1 mm) thick shield onto one of the two REM sensors in BEAM.
The station crew produced a hemispherical shield using the 3-D printer on the space station, and in the next few months this first shield will be replaced by two successively thicker shields, also 3-D printed, with thicknesses of about .13 inches (3.3mm) and .4 inches (10mm), respectively. The difference in measurements from the two REMs-one with a shield and one without-will help better resolve the energy spectra of the trapped radiation particles, particularly those coming from the South Atlantic Anomaly.
Space station crew members have entered the BEAM nine times since its expansion in May 2016. In addition to the REM shielding experiment activities, the crew has swapped out passive radiation badges called Radiation Area Monitors and they routinely collect microbial air and surface samples. These badges and samples are sent back to Earth for standard microbial and radiation analysis at Johnson.
The BEAM technology demonstration is helping NASA to advance and learn about expandable space habitat technology in low-Earth orbit for application toward future human exploration missions. The partnership between NASA and Bigelow supports NASA's objective to develop a deep space habitat for human missions beyond Earth orbit while fostering commercial capabilities for non-government applications.
Paris (ESA) May 22, 2017
Working inside the International Space Station is sometimes like assembling complex furniture but with the tools and paper instructions continually floating out of reach. Astronauts also face situations unforeseen by the instructions. Communication delays with ground control to troubleshoot these occasions mean even more valuable time is lost. Now, 'mobiPV' is looking to help. Developed by ... read more
Advanced Exploration Systems Division
Space Tourism, Space Transport and Space Exploration News
|The content herein, unless otherwise known to be public domain, are Copyright 1995-2017 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement|