Free Newsletters - Space - Defense - Environment - Energy - Solar - Nuclear
..
. 24/7 Space News .




ROBO SPACE
Robotic insects make first controlled flight
by Staff Writers
Cambridge MA (SPX) May 09, 2013


The RoboBees project "provides a common motivation for scientists and engineers across the university to build smaller batteries, to design more efficient control systems, and to create stronger, more lightweight materials," says Harvard engineering professor Robert J. Wood. "You might not expect all of these people to work together: vision experts, biologists, materials scientists, electrical engineers. What do they have in common? Well, they all enjoy solving really hard problems." Credit: Kevin Ma and Pakpong Chirarattananon, Harvard University. View a video of the RoboBee here.

In the very early hours of the morning, in a Harvard robotics laboratory last summer, an insect took flight. Half the size of a paperclip, weighing less than a tenth of a gram, it leapt a few inches, hovered for a moment on fragile, flapping wings, and then sped along a preset route through the air.

Like a proud parent watching a child take its first steps, graduate student Pakpong Chirarattananon immediately captured a video of the fledgling and emailed it to his adviser and colleagues at 3 a.m.-subject line, "Flight of the RoboBee."

"I was so excited, I couldn't sleep," recalls Chirarattananon, co-lead author of a paper published this week in Science.

The demonstration of the first controlled flight of an insect-sized robot is the culmination of more than a decade's work, led by researchers at the Harvard School of Engineering and Applied Sciences (SEAS) and the Wyss Institute for Biologically Inspired Engineering at Harvard.

"This is what I have been trying to do for literally the last 12 years," says Robert J. Wood, Charles River Professor of Engineering and Applied Sciences at SEAS, Wyss Core Faculty Member, and principal investigator of the National Science Foundation-supported RoboBee project. "It's really only because of this lab's recent breakthroughs in manufacturing, materials, and design that we have even been able to try this. And it just worked, spectacularly well."

Inspired by the biology of a fly, with submillimeter-scale anatomy and two wafer-thin wings that flap almost invisibly, 120 times per second, the tiny device not only represents the absolute cutting edge of micromanufacturing and control systems; it is an aspiration that has impelled innovation in these fields by dozens of researchers across Harvard for years.

"We had to develop solutions from scratch, for everything," explains Wood. "We would get one component working, but when we moved onto the next, five new problems would arise. It was a moving target."

Flight muscles, for instance, don't come prepackaged for robots the size of a fingertip.

"Large robots can run on electromagnetic motors, but at this small scale you have to come up with an alternative, and there wasn't one," says co-lead author Kevin Y. Ma, a graduate student at SEAS.

The tiny robot flaps its wings with piezoelectric actuators-strips of ceramic that expand and contract when an electric field is applied. Thin hinges of plastic embedded within the carbon fiber body frame serve as joints, and a delicately balanced control system commands the rotational motions in the flapping-wing robot, with each wing controlled independently in real-time.

At tiny scales, small changes in airflow can have an outsized effect on flight dynamics, and the control system has to react that much faster to remain stable.

The robotic insects also take advantage of an ingenious pop-up manufacturing technique that was developed by Wood's team in 2011. Sheets of various laser-cut materials are layered and sandwiched together into a thin, flat plate that folds up like a child's pop-up book into the complete electromechanical structure.

The quick, step-by-step process replaces what used to be a painstaking manual art and allows Wood's team to use more robust materials in new combinations, while improving the overall precision of each device.

"We can now very rapidly build reliable prototypes, which allows us to be more aggressive in how we test them," says Ma, adding that the team has gone through 20 prototypes in just the past six months.

Applications of the RoboBee project could include distributed environmental monitoring, search-and-rescue operations, or assistance with crop pollination, but the materials, fabrication techniques, and components that emerge along the way might prove to be even more significant.

For example, the pop-up manufacturing process could enable a new class of complex medical devices. Harvard's Office of Technology Development, in collaboration with Harvard SEAS and the Wyss Institute, is already in the process of commercializing some of the underlying technologies.

"Harnessing biology to solve real-world problems is what the Wyss Institute is all about," says Wyss Founding Director Don Ingber. "This work is a beautiful example of how bringing together scientists and engineers from multiple disciplines to carry out research inspired by nature and focused on translation can lead to major technical breakthroughs."

And the project continues.

"Now that we've got this unique platform, there are dozens of tests that we're starting to do, including more aggressive control maneuvers and landing," says Wood.

After that, the next steps will involve integrating the parallel work of many different research teams who are working on the brain, the colony coordination behavior, the power source, and so on, until the robotic insects are fully autonomous and wireless.

The prototypes are still tethered by a very thin power cable because there are no off-the-shelf solutions for energy storage that are small enough to be mounted on the robot's body. High energy-density fuel cells must be developed before the RoboBees will be able to fly with much independence.

Control, too, is still wired in from a separate computer, though a team led by SEAS faculty Gu-Yeon Wei and David Brooks is working on a computationally efficient brain that can be mounted on the robot's frame.

"Flies perform some of the most amazing aerobatics in nature using only tiny brains," notes coauthor Sawyer B. Fuller, a postdoctoral researcher on Wood's team who essentially studies how fruit flies cope with windy days. "Their capabilities exceed what we can do with our robot, so we would like to understand their biology better and apply it to our own work."

The milestone of this first controlled flight represents a validation of the power of ambitious dreams-especially for Wood, who was in graduate school when he set this goal.

"This project provides a common motivation for scientists and engineers across the university to build smaller batteries, to design more efficient control systems, and to create stronger, more lightweight materials," says Wood.

"You might not expect all of these people to work together: vision experts, biologists, materials scientists, electrical engineers. What do they have in common? Well, they all enjoy solving really hard problems."

"I want to create something the world has never seen before," adds Ma. "It's about the excitement of pushing the limits of what we think we can do, the limits of human ingenuity."

.


Related Links
Harvard School Of Engineering And Applied Sciences
Wyss Institute For Biologically Inspired Engineering At Harvard
All about the robots on Earth and beyond!






Comment on this article via your Facebook, Yahoo, AOL, Hotmail login.

Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle




Memory Foam Mattress Review
Newsletters :: SpaceDaily :: SpaceWar :: TerraDaily :: Energy Daily
XML Feeds :: Space News :: Earth News :: War News :: Solar Energy News





ROBO SPACE
How Would You Like Your Assistant - Human or Robotic?
Atlanta GA (SPX) May 03, 2013
Roboticists are currently developing machines that have the potential to help patients with caregiving tasks, such as housework, feeding and walking. But before they reach the care recipients, assistive robots will first have to be accepted by healthcare providers such as nurses and nursing assistants. Based on a Georgia Institute of Technology study, it appears that they may be welcomed w ... read more


ROBO SPACE
Northrop Grumman Completes Lunar Lander Study for Golden Spike Company

Scientists Use Laser to Find Soviet Moon Rover

Characterizing The Lunar Radiation Environment

Russia rekindles Moon exploration program, intends setting up first human outposts there

ROBO SPACE
Buzz Aldrin says US must colonize Mars

Landing is key puzzle in Mars trip plans: experts

New analysis suggests wind, not water, formed mound on Mars

India to have five rocket launches, including Mars mission, in 2013

ROBO SPACE
Outside View: Patents laws and suffering innovators

Glow-in-the-Dark Plants on the ISS

Russia Confirms Plans to Send Sarah Brightman to Space

Success Continues as NASA's Orion Parachute Tests Get More Difficult

ROBO SPACE
China launches communications satellite

On Course for Shenzhou 10

Yuanwang III, VI depart for space-tracking missions

Shenzhou's Shadow Crew

ROBO SPACE
The fourth Automated Transfer Vehicle is ready to meet up with its Ariane 5

NASA to pay Russia $424 mln more for lift into space

NASA Extends Crew Flight Contract with Russian Space Agency

Cargo spaceship docks with ISS despite antenna mishap

ROBO SPACE
Angara Rocket Launch Delayed to 2014

ESA's Vega launcher scores new success with Proba-V

European Vega rocket launch delayed due to weather

First of Four Sounding Rockets Launched from the Marshall Islands

ROBO SPACE
The Great Exoplanet Debate

NASA's Spitzer Puts Planets in a Petri Dish

Two New Exoplanets Detected with Kepler, SOPHIE and HARPS-N

Astronomer studies far-off worlds through 'characterization by proxy'

ROBO SPACE
iGT Debuts Airborne Satcom Solutions for Secure Connectivity and Situational Awareness

UF launches HiPerGator, Florida's most powerful supercomputer

Electrolysis method described for making 'green' iron

Do-it-yourself invisibility with 3D printing




The content herein, unless otherwise known to be public domain, are Copyright 1995-2014 - Space Media Network. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA Portal Reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement