by Staff Writers
Chicago IL (SPX) Nov 07, 2012
Oxide catalysts, typically formulated as powders, play an integral role in many chemical transformations, including cleaning wastewater, curbing tailpipe emissions, and synthesizing most consumer products. Greener, more efficient chemical processes would benefit greatly from solid oxide catalysts that are choosier about their reactants, but achieving this has proven a challenge.
Now researchers from Northwestern University and Argonne National Laboratory have developed a straightforward and generalizable process for making reactant-selective oxide catalysts by encapsulating the particles in a sieve-like film that blocks unwanted reactants.
The process could find applications in energy, particularly the conversion of biomass into sugars and then fuels and other useful chemicals.
A paper detailing the research, "Shape-selective Sieving Layers on an Oxide Catalyst Surface," was published October 28 in the journal Nature Chemistry.
Especially for selective oxidation, "The ability to conduct these reactions in a selective way opens doors to new applications in green chemistry and sustainability," said Justin Notestein, assistant professor of chemical and biological engineering at Northwestern's McCormick School of Engineering and the paper's corresponding author.
"Unlike current processes, which may require enzymes or precious metals, our method relies only on harmless, inert oxides. These are powders you can hold in your hand."
In testing their method, the researchers focused on photocatalytic oxidations such as the conversion of benzyl alcohol into benzaldehydes, reactions that are notoriously unselective.
The researchers coated a core particle of titanium dioxide, a harmless white pigment, with a nanometer-thick film of aluminum oxide. They used a synthesis method that resulted in a film pitted with tiny holes they dubbed "nanocavities," less than two nanometers in diameter.
This sieve-like coating allowed only the smaller reactants in a mixture to slip through the holes and react with the titanium oxide, while larger reactants were blocked. The result was much higher selectivity (up to 9:1) toward the less hindered reactants.
The process was conducted at room temperature and required only a low-power light source, whereas other catalysts may require precious metals or hazardous oxidants.
In addition to Notestein, other Northwestern authors of the paper include Richard P. Van Duyne, professor of chemistry in Northwestern's Weinberg College of Arts and Sciences; Peter C. Stair, professor and chair of the chemistry department in Weinberg; postdoctoral researcher Christian P. Canlas; PhD candidate Natalie A. Ray; and undergraduate Nicolas A. Grosso-Giordano. From Argonne National Laboratory, authors include Junling Lu, Sungsik Kee, Jeffrey W. Elam, and Randall E. Winans.
The research was conducted in collaboration with the Institute for Atom-Efficient Chemical Transformations, a Department of Energy Energy Frontier Research Center that also includes members from Purdue University and the University of Wisconsin.
The paper detailing the research, "Shape-selective Sieving Layers on an Oxide Catalyst Surface" was published October 28 in the journal Nature Chemistry.
McCormick School of Engineering at Northwestern University
Space Technology News - Applications and Research
|The content herein, unless otherwise known to be public domain, are Copyright 1995-2014 - Space Media Network. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA Portal Reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement|