Subscribe free to our newsletters via your
. 24/7 Space News .




CHIP TECH
Optical Fiber Innovation Could Make Future Optical Computers a 'SNAP'
by Staff Writers
Washington DC (SPX) Dec 16, 2011


Illustration of SNAP microresonators formed by nanoscale variation of the optical fiber diameter. Courtesy OFS Laboratories.

Optics and photonics may one day revolutionize computer technology with the promise of light-speed calculations. Storing light as memory, however, requires devices known as microresonators, an emerging technology that cannot yet meet the demands of computing. The solution, described in a paper published in the Optical Society's (OSA) journal Optics Letters, may lie in combining light's eerie quantum properties with a previously unknown quality of optical fiber.

Researchers from OFS Laboratories in Somerset, N.J., have developed a precise and efficient way to create microresonators by making nanoscale changes to the diameter of normal optical fiber.

These narrow sections are able to confine light, sending it on a back-and-forth corkscrew path inside a length of optical fiber and creating a microresonator.

Though trapping light in this so-called "Whispering Gallery" mode is a well-known phenomenon, the researchers have discovered a quick, efficient, and accurate way to manufacture long chains of these new microresonators, all based on a never-before-recognized characteristic of optical fiber.

This is a new technology path and an essential step toward designing a practical optical computer, as described in the Optics Letters paper.

"Optical computers, which use light particles-photons-in place of electrons to process and store information, have the potential to be much faster than today's electronic computers," said Misha Sumetsky, a researcher at OFS Laboratories and lead author on the study. "Unfortunately, manufacturing microresonators that meet the demands of optical computing has been a long and, until now, unsuccessful pursuit."

Microresonator Design
Designing a practical microresonator has been something of a "Holy Grail" on the path to optical computers. The current microresonator manufacturing technology is based on the well-established process of silicon lithography, which etches extremely precise features onto silicon wafers. For microresonators the most promising design appeared to be a long series of microscopic loops, which bottle up photons in whirling circles and then pass them from one ring to the next.

The longer the chain, the longer the signal could be stored as memory. Unfortunately, even the most precise manufacturing processes still produce tiny imperfections in the rings. These bumps on the road slowly weaken the signal, attenuating the light, and allowing the memory held in the buffer to fade away.

Sumetsky and his colleagues at OFS Laboratories, formerly part of the famous Bell Labs, pursued a path that abandoned the silicon wafer in favor of the silica strand of optical fiber.

In conventional applications, optical fiber-a very pure form of glass-uses the fundamental properties of light and refraction to keep light from slipping out and diffusing. The core and cladding of optical fiber have slightly different indexes of refraction, giving the fiber the ability to bend the path of light without causing scattering. Light traveling through the fiber bounces back and forth inside the core, keeping it traveling along the fiber for many kilometers with very little signal loss.

Coaxing Light into a Whispering Gallery
This sends the light careening through the fiber at extremely high speed, but just as cars barreling down the highway sometimes get directed onto "cloverleaf" off ramps, so too can light be coaxed from the fiber and into a spiral path. Unlike cars, however, light doesn't need to slow down on the off ramp.

In this case, the off ramp is created by narrowing the fiber to a small diameter to coax the light out of the core and into a fiber aligned perpendicularly and positioned very close to, or actually touching the first. Because they are so close, and the original fiber narrows down to a mere fraction of its original size, a portion of the light is able to make a literal "quantum leap" to the other fiber. This is an effect known as "evanescent coupling" and it enables an electromagnetic wave - light - to connect (or couple) from one fiber to another.

The light now finds itself not traveling down a straight path but rather racing around the fiber surface in very tight circles. Even though the light maintains its original pace within the glass, because it's really taking the long way around, corkscrewing along the new fiber's surface, it propagates down the fiber at a fraction of its original speed (figure 1).

This special redirection of light is known as the "Whispering Gallery" effect, named after the phenomenon that takes place in certain architectures, such as the St. Paul's Cathedral in London and Grand Central Station in New York, where someone whispering along the wall would hear their whisper coming from behind them as the sound traveled around the edge of the room and returned to its original spot (figure 2).

Optical Fiber Microresonators
Sumetsky and his colleagues were able to vary the optical fiber diameter by several nanometers. They did this with unprecedented precision, on the order of a hundredth of a nanometer.

This dimpling or narrowing of the fiber effectively changes the properties of the Whispering Gallery and has the effect that light traveling along the surface of the fiber would turn around and head back the way it came. If it were traveling between two of these narrowed portions of fiber, the light would continue to resonate back and forth with very little loss of signal. This is, in fact, the microresonator.

These optical fiber microresonators currently are able to retain light two orders of magnitude longer than lithographic microresonators - and the researchers say it's possible to push that number even higher. If sufficient number of optical fiber microresonators were coupled together, again taking advantage of evanescent coupling, then any information contained in the light pulses could be stored long enough for computational purposes. The researchers have so far been able to couple 10 optical fiber microresonators, an important proof-of-concept step.

Manufacturing is a 'SNAP'
It's possible to create these nanoscale changes to the radius of the fiber by exploiting a property inherent in the fiber created during manufacturing and discovered at OFS Laboratories several years ago. Optical fiber is made by heating a much thicker rod of glass with a precise chemical makeup and stretching and drawing it out into extremely fine and flexible fibers. When the fiber is drawn out, the process introduces certain tension, and this tension is frozen in, creating a predetermined amount of stress.

The researchers harnessed this fixed stress by directing a laser beam at the fiber to heat it. By raising the fiber's temperature, but keeping it well below the melting point, it was possible to release this intrinsic pressure, changing the diameter and refractive index of the fiber without deforming it any further. As long as the fiber is produced under the same conditions and it is heated below the melting point, the same effect is always achieved. This process enables a technology that the researchers call Surface Nanoscale Axial Photonics (SNAP).

"We heated it to a temperature lower than the melting temperature," said Sumetsky. "This annealing allows us to change the radius in this nanoscale range. In the new system, the accuracy of the fiber radius variation is about 0.1 angstrom - orders of magnitude better than achieved before."

Previous attempts have been made at harnessing optical fiber for microresonators, but these relied on polishing or melting the fiber to change its diameter. This produced very uneven results and could not achieve nanoscale dimensions. To enable evanescent coupling, it's vital that the circumference of the microresonators be controlled to sub-angstrom accuracy. The SNAP process ensures this accuracy and that each microresonator is nearly identical.

This is the crucial point the researchers believe will enable the technology to move from laboratory studies to manufacturing. As long as the optical fiber is produced under the same conditions, it will always produce the same effect when heated, changing its properties in the same precise manner. "We can faithfully reproduce these resonators. There's a real, robust way of fabricating these, and this is the first paper that actually shows that," Sumetsky said.

According to the researchers, it's possible these microresonators could be used in specialized devices in about two to three years. However, their greatest potential may be in pioneering optical computing and in enabling fundamental physics research.

Paper: "Surface nanoscale axial photonics: Robust fabrication of high quality factor microresonators," Optics Letters, Vol. 36, Issue 24, pp. 4824-4826 (2011).

.


Related Links
The Optical Society
Computer Chip Architecture, Technology and Manufacture
Nano Technology News From SpaceMart.com






Comment on this article via your Facebook, Yahoo, AOL, Hotmail login.

Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle








CHIP TECH
New method for enhancing thermal conductivity could cool computer chips, lasers and other devices
Nashville TN (SPX) Dec 16, 2011
The surprising discovery of a new way to tune and enhance thermal conductivity - a basic property generally considered to be fixed for a given material - gives engineers a new tool for managing thermal effects in smart phones and computers, lasers and a number of other powered devices. The finding was made by a group of engineers headed by Deyu Li, associate professor of mechanical enginee ... read more


CHIP TECH
Peres promotes Israeli moon probe

Hundreds of NASA's moon rocks missing: audit

Schafer Corp Signs Licensing Agreement with MoonDust Technologies

Russia wants to focus on Moon if Mars mission fails

CHIP TECH
MARSIS Completes Measurement Campaign Over Martian North Pole

Preparing for human exploration of Mars by measuring background radiation

Mars-Bound Rover Begins Research in Space

Phobos-Grunt mission now impossible says chief designer

CHIP TECH
NASA to change private spacecraft plans

Raytheon Announces Commercial Availability of High Speed Guard

Raytheon BBN Awarded Research Contract To Enable Early Awareness Of Emerging Technology

Russian who helped put Gagarin in space dies at 99

CHIP TECH
Two and a Half Men for Shenzhou

China honors its 'father' of space efforts

Philatelic Cover Reveals the secret names of second Taikonaut team

First Crew for Tiangong

CHIP TECH
ESA astronaut Andre Kuipers Ready For Launch To ISS

Astronaut TJ Creamer Learns Space Station Science From the Ground Up

FLEX-ible Insight Into Flame Behavior

Growing Knowledge in Space

CHIP TECH
Arianespace Signs First launch contracts for Vega

Arianespace Completes 2011 Launch Manifest With Successful Soyuz Campaign

Soyuz is cleared for its second Arianespace launch from the Spaceport

NASA Announces: Dragon To The Space Station

CHIP TECH
Giant Super-Earths Made Of Diamond Are Possible

New Planet Kepler-21b discovery a partnership of both space and ground-based observations

Astronomers Find Goldilocks Planet and Others

The Habitable Exoplanets Catalog, a new online database of habitable worlds

CHIP TECH
Stress causes clogs in coffee and coal

New eco-friendly foliar spray provides natural anti-freeze

Amazon selling over one million Kindles a week

Pilots cleared to use iPad during takeoff, landing




The content herein, unless otherwise known to be public domain, are Copyright 1995-2014 - Space Media Network. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA Portal Reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement