by Laura Betz for Goddard Space Flight Center
Greenbelt, MD (SPX) Oct 05, 2012
These engineers from Genesis Engineering Solutions are doing what's called "blanket closeout" and it took two days to complete.
The gold louvers are composite mirrors, made of gold-coated carbon fiber, designed to remove the heat from inside the IEC to deep space.
The IEC holds computing hardware for each of the science instruments. This special part of the telescope allows the computer hardware to operate at room temperature on the cold side of the telescope by directing heat away so that the telescope can deliver infrared imagery.
"As heat radiates off the panel that they are attached to, the mirrors focus it in a particular direction (namely, away from the telescope)," says Lutter.
After the engineers completed blanketing, the IEC was then placed in the thermal chamber to be tested against the chill of a space-simulated environment. This process is called the thermal vacuum and balance test. During this test, temperatures drop to about 90 degrees Kelvin (-297.67 degrees Fahrenheit or -183.15 degrees Celsius).
"This is important because we need to know how effective the IEC is at keeping heat away from the cold side of Webb," says Lutter. "If even a little heat escapes the IEC in the direction of the telescope, the telescope's sensitivity could be ruined."
NASA's James Webb Space Telescope
Space Telescope News and Technology at Skynightly.com
|The content herein, unless otherwise known to be public domain, are Copyright 1995-2014 - Space Media Network. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA Portal Reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement|