X-37 Reusable Spaceplane Program Achieves Milestones

SPACEMART

The Boeing-built X-40A Space Maneuver Vehicle, an 85 percent scale version of X-37, recently completed its fifth straight successful test flight at NASA's Dryden Flight Research Center.

Seal Beach - May 15, 2001
Boeing said Tuesday it was making substantial progress toward key milestones in the X-37 reusable spaceplane program, initiated under a cooperative agreement signed with NASA in July 1999.

Beyond significant fabrication and assembly results, the program has successfully conducted flight tests of the X-40A, a vehicle designed to verify the flight dynamics of the X-37 and reduce risk on the program.

The Boeing-built X-40A Space Maneuver Vehicle, an 85 percent scale version of X-37, recently completed its fifth straight successful test flight at NASA's Dryden Flight Research Center.

During the flights, the unmanned X-40A is dropped from a Chinook helicopter from 15,000 feet, and it autonomously acquires the runway and lands in a mode similar to a conventional aircraft.

The X-40A uses the GN&C (Guidance, Navigation & Control) algorithms, software, CADS (Calculated Air Data System), SIGI (Space Integrated GPS/INS) and aerodynamic performance maneuvers of the X-37 as well as its mobile FOCC (Flight Operations Control Center). The X-40A will perform a total of seven drop tests to support the low-speed atmospheric flight dynamics of the X-37.

"We are particularly excited about the X-40A flight test phase. The recent series of successful flights has really inspired our team," said Ron Prosser, vice president Advanced Space & Communications for Boeing Phantom Works.

"We are building confidence in the systems' autonomous vehicle operations capabilities while acquiring valuable flight data that will verify the subsonic approach and landing characteristics of the X-37 vehicle design. Concurrently, the balance of the X-37 program is making excellent technical progress across the board."

"Prior to performing the flight tests, we verified the software and flight algorithms using our Avionics and Software Simulation Lab in conjunction with the FOCC," said Randy Hein, X-40A project manager for Boeing Phantom Works.

"A similar lab will be used to verify the operations of the X-37. In fact, the X-37 lab has recently become operational, with multi-string and redundant hardware now undergoing testing with the first release of the X-37's flight software."

The X-37 is unpiloted, autonomously operated and will be the only X-vehicle capable of conducting on-orbit operations and collecting test data in the Mach 25 (reentry) region of flight. The X-37 will be launched into orbit and will have the capability to remain in space for up to 21 days.

It will also serve as a test bed for 40 airframe, propulsion and operation technologies designed to make space transportation and operations significantly more affordable. Potential new commercial and military reusable space vehicle market applications for these technologies range from on-orbit satellite repair to the next-generation of totally reusable launch vehicles.

The X-37 concept permits testing of a wide variety of experiments and technologies, including a highly durable, high-temperature thermal protection system; storable, non-toxic liquid propellants; and important new aerodynamic features, all of which are applicable to future reusable space vehicles.

The vehicle's modular design, including a seven foot by four foot experiment bay, will also allow testing of both current and future technologies within the same vehicle, providing long-term cost savings.

"At this point in time the X-37 vehicle is progressing along well," said Dick Cervisi, X-37 program manager for Boeing Phantom Works. "Wind tunnel tests designed to verify the aerodynamic design and performance from Mach 10 to landing speeds are 93 percent complete.

"In addition, aeroheating wind tunnel tests to verify the methodology of predicting reentry environment are 100 percent complete, and the arc jet testing of our new thermal protection system concepts have matched the predicted values. Over two-thirds of the X-37 design is complete. We're looking forward to beginning final vehicle assembly this summer."

The X-37 will incorporate advanced technologies and processes from throughout Boeing. The graphite/BMI fuselage is being manufactured at the St. Louis facility and the construction of the composite wings is being carried out at the Huntington Beach facility.

Eighty-five percent of the composite parts are fabricated, and final assembly of the fuselage structure began last month. Final assembly of the X-37, which is 27.5 feet long with a wingspan of 15 feet, will take place at the Boeing X-Vehicle Assembly facility in Palmdale, Calif.

The first unpowered drop test of the X-37 from a NASA B-52 is planned for 2002 at Edwards Air Force Base, Calif., while orbital tests are planned for 2004.

SPACEMART

NASA Opens New RLV Office at Huntsville

Huntsville - May 15, 2001
The Second Generation Reusable Launch Vehicle office at NASA's Marshall Space Flight Center in Huntsville, Ala. - the office that oversees the Space Launch Initiative - will now report directly to the Director of NASA's Marshall Center. This program previously reported to the Director of Marshall's Space Transportation Directorate.

Thanks for being here; We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain. With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords. Our news coverage takes time and effort to publish 365 days a year. If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Contributor $5 Billed Once credit card or paypal		SpaceDaily Monthly Supporter $5 Billed Monthly paypal only

The content herein, unless otherwise known to be public domain, are Copyright 1995-2016 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement All images and articles appearing on Space Media Network have been edited or digitally altered in some way. Any requests to remove copyright material will be acted upon in a timely and appropriate manner. Any attempt to extort money from Space Media Network will be ignored and reported to Australian Law Enforcement Agencies as a potential case of financial fraud involving the use of a telephonic carriage device or postal service.