. | . |
Physicists improve understanding of heat and particle flow in the edge of a fusion device by Staff Writers Plainsboro NJ (SPX) Apr 16, 2019
Physicists at the U.S. Department of Energy's (DOE) Princeton Plasma Physics Laboratory (PPPL) have discovered valuable information about how electrically charged gas known as "plasma" flows at the edge inside doughnut-shaped fusion devices called "tokamaks." The findings mark an encouraging sign for the development of machines to produce fusion energy for generating electricity without creating long-term hazardous waste. The result partially corroborates past PPPL findings that the width of the heat exhaust produced by fusion reactions could be six times wider, and therefore less narrow, concentrated, and damaging, than had been thought. "These findings are good news for ITER," said PPPL physicist C.S. Chang, lead author of a description of the research in Physics of Plasmas, referring to the international fusion experiment under construction in France. "The findings show that the heat exhaust in ITER will have a smaller chance of harming the machine," Chang said. Fusion, the power that drives the sun and stars, is the fusing of light elements in the form of plasma - the hot, charged state of matter composed of free electrons and atomic nuclei - that produces energy. Scientists around the world are seeking to replicate fusion on Earth for a virtually inexhaustible supply of power to generate electricity. The superhot plasma within tokamaks, which can reach hundreds of millions of degrees, is confined by magnetic fields that keep the plasma from the walls of the machines. However, particles and heat can escape from the confinement fields at the "magnetic separatrix" - the boundary between the magnetically confined and unconfined plasmas. At this boundary, the field lines cross at the so-called X-point, the spot where the waste heat and particles escape and strike a target called the "divertor plate." The new findings reveal the surprising effect of the X-point on the exhaust by showing that a hill-like bump of electric charge occurs at the X-point. This electrical hill makes the plasma circulate around it, preventing plasma particles from traveling between the upstream and downstream areas of the field lines in a straight path. Instead, like cars maneuvering around a construction site, the charged plasma particles take a detour around the hill. The researchers produced these findings with XGC, an advanced computer code developed with external collaborators at PPPL that models the plasma as a collection of individual particles rather than as a single fluid. The model, which showed that the connection between the upstream plasma located above the X-point and the downstream plasma below the X-point formed in a way not predicted by simpler codes, could lead to more accurate predictions about the exhaust and make future large-scale facilities less vulnerable to internal damage. "This result shows that the previous model of the field lines involving flux tubes is incomplete," said Chang - referring to the tubular areas surrounding regions of magnetic flux - "and that the current understanding of the interaction between the upstream and downstream plasmas is not correct. "Our next step is to figure out a more accurate relationship between the upstream and downstream plasmas using a code like ours. That knowledge will help us develop more accurate equations and improved reduced models, which in fact are already in progress."
Ready, set, go: Scientists evaluate novel technique for firing up fusion-reaction fuel Plainsboro NJ (SPX) Apr 15, 2019 To capture and control on Earth the fusion reactions that drive the sun and stars, researchers must first turn room-temperature gas into the hot, charged plasma that fuels the reactions. At the U.S. Department of Energy's (DOE) Princeton Plasma Physics Laboratory (PPPL), scientists have conducted an analysis that confirms the effectiveness of a novel, non-standard way for starting up plasma in future compact fusion facilities. The innovative technique, known as "transient coaxial helical injection ... read more
|
|
The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us. |